Verilog / VHDL projects — HireLancer archive

ID / Date Listing

Designing a fully-differential Miller compensated two-stage opamp with CMFB.

Goal You are tasked with designing a fully-differential Miller compensated two-stage opamp with CMFB. This opamp will be eventually used to form an inverting am...

HL-39980597

Rencana Penggalangan Dana Pendidikan

Saya sedang mencari bantuan profesional untuk menyusun strategi pendanaan biaya pendidikan tingkat SD/SMP/SMA bagi anak saya. Lingkup pekerjaan: • Menganalisis...

HL-39980628

Arquitetura de Processador MIPS 32-bits

Aqui está uma sugestão de descrição de projeto, otimizada para publicação em uma plataforma como a Freelancer.com, com base no documento que você forneceu. Títu...

HL-39962590

Automatic room light controller using Verilog HDL simulation+ Arduino

I’m building an Automatic Room Light Controller that blends FPGA-level logic with a hands-on Arduino prototype. The goal is simple: when the ambient light is lo...

HL-39953011

Expert VHDL/Verilog Developer for 32-bit MIPS CPU with Flopoco FPU, Pipeline, and Cache

I am seeking a highly skilled hardware design engineer for a fixed-term academic project. The objective is to design, implement, and verify a complex 32-bit MIP...

HL-39947356

Custom VHDL AXI Stream Core

I need a VHDL IP core that sits between two AXI4-Stream FIFOs, ingests a packet of N values, performs a simple arithmetic tweak, and pushes the result back out....

HL-39940010

FPGA subsystem

RTL Engineer – DMA Subsystem (FPGA / Verilator Simulation) Overview Seeking an experienced RTL engineer to implement and verify a DMA (Direct Memory Access) con...

HL-39937836

Automotive Sensor ASIC Blueprint

I’m planning an automotive-grade ASIC focused on reliable sensor interfacing and need a seasoned embedded engineer to shape the initial blueprint. Here’s what I...

HL-39935020

Algorithmic Trading Experts for Full Stack

I’m scaling my trading institution and need hands-on talent across the entire electronic trading stack. The work covers multiple roles all related to trading vi...

HL-39933377

CNN Accelerator Design in Verilog

I need a Verilog implementation of a CNN accelerator with a DRAM interface. The accelerator should perform matrix multiplication on fixed-size matrices. The DRA...

HL-39933381

FPGA VHDL RTL Simulation

Project: RTL Design and Simulation for FPGA (VHDL) Goal: Develop and verify a complete FPGA RTL design in VHDL, including all core modules and corresponding tes...

HL-39928563

Verilog 1011 FSM for Zynq

I need a concise, synthesizable Verilog finite-state machine that detects the bit sequence 1011 (with overlap) and drives a single-cycle “found” pulse when the...

HL-39928579

3-Bit Counter on Zynq

I’m looking for a clean Verilog design that realises a 3-bit synchronous counter, counts in ordinary binary from 0 through 7, and drives a single seven-segment...

HL-39927734

64-bit FPGA Pulse Counter

I have to count very fast digital pulses—up to 200 MHz—using a Xilinx XC7S50 (Spartan-7, BGA package). The design must implement four independent 64-bit counter...

HL-39926351

Core Video Engine (CVE) card design and prototype, manufacturing

specs: CVE_Technical_Specifications.pdf SOW: CVE_Statement_Of_Work.pdf Sensor specs: Bolometric (1).pdf

HL-39916711

Game roblox

Saya ingin bekerja apa itu, saya ingin kerja apa yang di berikan kepada saya

HL-39907948

FPGA-Controlled Precision Current Source Project

I need a complete design for a constant-current driver that can source or sink programmable currents through five pairs of output pins, all of which must be abl...

HL-39905085

Custom PCIe DMA Device Firmware Development - 21/10/2025 21:51 EDT

I’m looking for an experienced embedded developer to build custom firmware for a PCIe DMA device (75t / 100t family). The goal is to emulate full device behavio...

HL-39899052

FPGA EMV and DSA Analysis

I have raw captures from both contact (ISO 7816) and contactless (ISO 14443) EMV cards fed directly into an FPGA test rig. My objective is two-fold: complete pr...

HL-39897715

FPGA Rotary Encoder 100 MHz Interface

I’m building a motion-control stage that relies on a quadrature rotary encoder operating behind a 100 MHz system clock. I need a compact FPGA module—Verilog or...

HL-39891428

iCE40 DVB PID Filter Module

I need a compact DVB packet processor written in Verilog that runs on a Lattice iCE40 FPGA. The sole task is packet filtering—specifically PID filtering—restric...

HL-39886993

Custom PCIe DMA Device Firmware Development

I’m looking for an experienced embedded developer to build custom firmware for a PCIe DMA device (75t / 100t family). The goal is to emulate full device behavio...

HL-39872823

FPGA to read 1Mhz rotary Encoder

We are looking for an experienced FOGA (Field-Oriented Gate Array) or FPGA programmer to assist with reading data from a high-speed rotary encoder operating at...

HL-39865722

FPGA Digital Lock Guidance

I’m building a simple digital-lock proof-of-concept on a Nexys Artix-7 board using Vivado. At this stage the only feature I need is a basic lock-out mechanism—n...

HL-39858594

FPGA Design Engineer - full remote

We are looking for a skilled FPGA Design Engineer with solid experience in VHDL development and FPGA toolchains (Vivado, Quartus). You will collaborate remotely...

HL-39856323

FPGA RISC-V CNN Accelerator

I need a RISC-V co-processor that plugs into my existing RISC-V core and dramatically speeds up convolutional layers in a CNN inference pipeline. The sole metri...

HL-39845016

High-Speed Data Transfer FPGA Development

I am seeking an experienced FPGA programmer to develop a custom hardware acceleration solution for high-speed data transfer over Ethernet. Key requirements: - D...

HL-39840315

Help with Digital Circuit Projects

My team is tackling a run of mini-projects centred on digital circuit design and we’re looking for an ECE-trained partner who can jump in quickly. The work rang...

HL-39837198

Maple Systems PLC Programming

I need assistance with programming and development for Maple Systems PLC. Key tasks include: - Creating new control programs with basic complexity - Developing...

HL-39830264

FPGA-based SDI Fiber Converter Development

I need an experienced FPGA developer to design, program, and test an SDI fiber converter. The converter should support video signal conversion for HD-SDI and 3G...

HL-39826237

RMCM FIR Filter Verilog Simulation

I need a clean, Segmened Analysis and Necessity first search algorithm implementation using python then reduced coefficients constants will be given as input to...

HL-39813653

Artix-7 High-Speed DAQ

I need a compact yet reliable data-acquisition design that runs on an Artix-7 FPGA and lets me capture analog signals up to about 50 MHz from 6 x AD9226 12 bit...

HL-39780512

Antenna Matching Network Design & Simulation

I have a high-frequency feed that combines an SR1010 radio module with an FXP810.07.0100C flex antenna. What I need now is a concise yet complete RF matching so...

HL-39775469

VHDL implementation of semi-parallel filter architecture

I'm finishing my TFG on FPGA implementation, I need someone to help me with the semi-parallel architecture of a filter bank, I have the code done and the design...

HL-39774954

Omron/Weintek HMI Programming

I need a skilled programmer to develop an HMI program for Omron/Weintek systems. The primary focus is on user interface design. The program should include speci...

HL-39773485

Custom PCIe x1 DMA Interposer Card Development

Hardware Description – DMA Interposer Card Overview The DMA Interposer Card is a custom PCIe x1 device designed to interface between a host computer and a downs...

HL-39755436

FPGA/ASIC Bitcoin Vanity Generator

I already rely on Jean-Luc Pons’s open-source VanitySearch (C/CUDA) to grind private keys on GPUs, but I now need the exact same pipeline in hardware. The goal...

HL-39722767

FPGA-based Image Processing

FPGA-Based Image Processing Project Objective: To design and implement a novel FPGA-based image processing system using a combination of hardware description la...

HL-39720270

Labview Automation

I need Support to create a state Maschine based in DAQmx DIO to Control a small Test bench. Project is quite simple and might be done in a few hours

HL-39709041

Multitopology Converter Simulation in Simulink

I need a boost, buck, buck-boost and sepic, converter simulated in Simulink using a variable voltage source. The simulation should cover: - Efficiency over vary...