Antenna Matching Network Design & Simulation
Budget: $2 – $15 USD
I have a high-frequency feed that combines an SR1010 radio module with an FXP810.07.0100C flex antenna. What I need now is a concise yet complete RF matching solution:
• A clean circuit schematic of the matching network placed between the SR1010 feed and the FXP810 antenna.
• Recommended R, L, C values that will bring the line to its optimum impedance across the target high-frequency band.
• An HFSS or CST simulation that validates those values (S-parameters, return loss, bandwidth) so I can see exactly how the network behaves before moving to layout.
Please include the project files for the simulator you use, along with a short report that walks through key results and any tuning advice.
Acceptance will be based on the simulation showing a match better than –10 dB across the specified band and the schematic reflecting standard, easily sourced components.
• A clean circuit schematic of the matching network placed between the SR1010 feed and the FXP810 antenna.
• Recommended R, L, C values that will bring the line to its optimum impedance across the target high-frequency band.
• An HFSS or CST simulation that validates those values (S-parameters, return loss, bandwidth) so I can see exactly how the network behaves before moving to layout.
Please include the project files for the simulator you use, along with a short report that walks through key results and any tuning advice.
Acceptance will be based on the simulation showing a match better than –10 dB across the specified band and the schematic reflecting standard, easily sourced components.
Related categories:
Electronics
Verilog / VHDL
Microcontroller
Electrical Engineering
Antenna Design
Simulation