Simple DAC Integration on PCB
I have a simple, already-routed PCB that needs one last feature before I can send it to JLCPCB: a single-channel digital-to-analog converter (DAC) capable of dr...
Read moreI have a simple, already-routed PCB that needs one last feature before I can send it to JLCPCB: a single-channel digital-to-analog converter (DAC) capable of dr...
Read moreI’m building a wearable, battery-powered device that treats urinary incontinence by driving a micro-stepper screw mechanism. The work is split into two closely...
Read moreI am outlining a new, ultra-low-power wearable that centres on health monitoring. The core features I must enable are continuous heart-rate, blood-oxygen (SpO₂)...
Read moreSaya ingin memasang lampu otomatis di garasi atau gudang saya. Lampu harus menyala secara otomatis saat cahaya di ruangan turun di bawah tingkat tertentu, lalu...
Read moreI already have a CAD model for a patent-pending device, and now I need to turn that static design into a working proof-of-concept driven by a Raspberry Pi. Your...
Read moreI need a RISC-V co-processor that plugs into my existing RISC-V core and dramatically speeds up convolutional layers in a CNN inference pipeline. The sole metri...
Read moreMy project centres on a microcontroller dedicated to precise servo-motor control. The basic hardware is already on the bench; what’s missing is reliable, well-s...
Read moreI need a compact ESP32-based controller that will sit between my main grid supply and a solar array, sense which source is available, and automatically transfer...
Read moreI need an audio-visual technician who genuinely knows the older Lighthouse R7 ER LED screens and their companion Lip XGA processor. The gear is still performing...
Read moreNecesito desarrollar el firmware completo para una placa basada en STM32F407. Ya cuento con el diagrama de bloques y la especificación funcional; los compartiré...
Read moreHi i need a key mapper I'm doing some tests the simpliest though most complex thing i could think of is doing a keyboard outputs from a amplitude + frequency fr...
Read moreI need a Modbus relay board that can control 8 relays remotely using the RS485 protocol. Have a protections built in Key Requirements: - Ability to control rela...
Read moreMy BMI application already runs smoothly on an ATmega32, but it needs to grow. I want the firmware extended to accept rich, custom user-data input (think age, g...
Read moreCAD: KiCad v9 Stack-up: 4-layer minimum (Signal / GND / Power / Signal). Use 6-layer only if routing/thermal demands. Temp rating: Operate −40…+105 °C (select 1...
Read moreI have an ESP32 project with a TFT display that measures BMI (Body Mass Index). The code is working, but there’s a timing issue during the measurement phase. Cu...
Read moreCuento con una placa ATmega ya cableada y necesito el firmware que implemente un controlador PID capaz de mantener la temperatura interna de mi incubadora avíco...
Read moreI'm looking for an experienced PLC programmer to automate a production line using Siemens PLCs. Key Requirements: - Proficiency in Siemens PLC programming (S7-2...
Read moreThe DS1307Z real-time clock on my custom PCB stubbornly reports nonsense values—think 00:00:80—and refuses to accept new time or date settings. Everything else...
Read moreI am seeking an experienced FPGA programmer to develop a custom hardware acceleration solution for high-speed data transfer over Ethernet. Key requirements: - D...
Read moreI have a custom motorcycle display that I’d like to bring to life. The moment the bike “starts,” I need three things to happen in perfect sync: 1. The tail ligh...
Read moreI already have a working proof-of-concept for a tiny, battery-free pressure sensor that sits on a flexible PCB and chats with a coin-sized rigid reader board ov...
Read moreTengo un equipo de inspección de tuberias ,el cual dispone de pcb ,y software propio. Quiero realizar una actualizacion de las pcb ,la programacion y el softwar...
Read moreI’m building an Arduino-based device that brings together multiple sensors, motion components, and wireless modules, all coordinated through a clean UART link....
Read moreI'm looking for an experienced developer to create a 12V Modbus RTU controller with an RS485 interface for a Linak actuator. The controller should be capable of...
Read moreI am a PCB designer with 7 years of experience and have developed a custom board based on STM32H743II, attached to an lcwiki 7-inch IPS LCD. Board Specification...
Read moreI’ve already built the core vending-machine electronics on an ESP32 and now want to complete the payment side so customers can pay seamlessly via UPI. My own fa...
Read moreI want a clean, well-commented firmware project for an ESP32 that will drive two core functions in my home-automation setup: it must switch my lighting circuits...
Read moreAbout the Role We’re building smart hardware products and are looking for someone who enjoys working at the intersection of electronics and coding. The role wil...
Read moreWe’re building a premium motorsport device. We need a hands-on firmware freelancer to help bring our first prototypes to life and then carry it through to produ...
Read moreProject Title: Active USB-C Hub Prototype Development Location: Remote (Immediate Start) Engagement: Contract (Project-based) Start Date: Immediate Duration: 2–...
Read moreI’m commissioning a ground-up single-board computer that boots mainstream Linux and is purpose-built for embedded systems which need serious processing muscle....
Read moreI need small STM32H7 firmware that outputs data from RAM to a GPIO pin as fast as possible. We have 1 pin for data and 1 pin for clock. The data must be present...
Read moreI have a single Ford instrument-cluster dump that I can’t open. The file itself is healthy, yet any viewer treats it as an unreadable “.jpg”, which tells me the...
Read moreI already have the hardware on my bench— an HMC2003 board, an NVE ALT-0021 board, an OMGS3 ESP32 board and the accompanying analog-to-digital converter. What I...
Read moreI have a custom-built PCB centred on the ATSAMD21J15 and I want to prove it alive with the classic “blink” sketch from the Arduino IDE. From many previous attem...
Read moreI’m looking for someone to help me finish a project based on the Waveshare ESP32-S3 Touch LCD 7". The graphics part is already done, but the touch functionality...
Read moreScope of Works – Electronics Development for Cold Water Flushing Unit Project summary The requirement is to design and develop the electronics system for a comp...
Read moreI'm seeking an expert to integrate OCPP 1.6 with both AC and DC fast charging stations. The integration should support the following functionalities: - Remote S...
Read moreNyák tervezés és minden fájl ami kell a gyártáshoz és driver Windows-ra, Linux-ra, Androidra. Pci-e 4.0 x16 kártya: wigig 802.11ad/802.11ay 176gbps 4x4 mimo, wi...
Read moreI'm seeking an talented embedded systems developer to create modify C code for a microchip dsPIC 16bit controller. Used for extremely high speed switching using...
Read more