Electrical Engineering projects — HireLancer archive

ID / Date Listing

Develop Embedded System for Qubit vs Binary Bit Systems in 5G/6G Networks Using MATLAB

I am looking to develop an embedded system project that compares Qubit-driven and Binary Bit systems under Massive MIMO-OFDM for 5G/6G networks using MATLAB. Th...

HL-39950176

Garage Conversion Architectural Plans

I’m ready to turn my attached garage into a full-fledged dining room and need a complete set of stamped architectural drawings that Jackson, NJ will approve wit...

HL-39950112

Jetson Carrier & Power PCB

I’m building a small embedded vision rig and need a compact PCB that can host an NVIDIA Jetson compute module plus a separate, no-frills power distribution boar...

HL-39950098

PE Analysis of Fluke Data 1736 Load Study Data

I already completed a seven-day logging session with a Fluke 1736 and have the native .f4p files ready. What I need now is a licensed Professional Engineer who...

HL-39949845

Delta PLC Machining Automation

I need a Delta PLC & HMI specialist who can take our machining line from manual control to fully automated operation. The equipment already has sensors, drives,...

HL-39949523

Gaming Console PCB Design

I need a PCB designed for a gaming console. The PCB should support audio output functionalities. Ideal Skills and Experience: - Expertise in PCB design - Experi...

HL-39949588

Electrical PEng Competency Report -- 3

I need a professionally written Competency-Based Assessment (CBA) report that showcases my Electrical Engineering experience for my P.Eng application. The narra...

HL-39949609

Low-Profile TKL PCB & BOM

I’m building a tenkeyless mechanical keyboard that uses low-profile, hot-swap switches and I need a complete hardware package to move it from concept to product...

HL-39949412

Automotive-Grade ESP32 PCB Design

I need a complete, production-ready hardware design for an ESP32 board that will sit inside an automotive environment and serve engine-control, infotainment and...

HL-39949100

Utility-Scale Solar Review & Stamp

I have a utility-scale PV project (well over 100 kW) whose full plan set is ready for a professional once-over and an engineer’s stamp. I need two things from y...

HL-39949129

Utility-Scale Solar Review & Stamp -- 2

I have a utility-scale PV project (well over 100 kW) whose full plan set is ready for a professional once-over and an engineer’s stamp. I need two things from y...

HL-39948492

Design GATE Mechanical Test Series

I need a complete GATE-style test series built exclusively for Mechanical Engineering candidates. The final package should feel exactly like the official GATE p...

HL-39948631

R. STAHL HMI Program Transfer

I have an ET-306-A-TX-TFT Windows CE panel from R. STAHL / Exicom that currently runs a fully functional SPSPlusWIN application. I need a specialist who can log...

HL-39948355

Contract Lightning Protection System (LPS) Installer (Journeyman or Master)

Project Location: Dallas, Texas Role Type: Freelance / 1099 Independent Contractor Project-based Project Scope: Seeking a certified and licensed installer to pe...

HL-39947683

Telecom Tower Maintenance Expert Needed

Project Overview: We are seeking experienced freelance telecom tower maintenance technicians to perform routine inspection, maintenance, and repair of telecom t...

HL-39947431

Finalize PCB & Prototype Order

My 2-layer PCB is already 95 % complete. I now need a fresh set of eyes to: • Tweak and lock-in the remaining component placement so the board is clean, balance...

HL-39947170

Arduino Kiwi Grading Machine Support

My M.Tech thesis centres on building a weight-based grading machine for Indian kiwis. The prototype already has an Arduino Uno, a stepper motor that turns a rot...

HL-39946823

PLC Lead-Lag Pump Cascade Logic

I need a clean, well-commented ladder logic program that will run a cascading system for water-distribution pumps. The installation has two configurations—one b...

HL-39946629

CNC Plasma Isolation Circuit

I’m upgrading the plasma source on my CNC plasma cutter and need an experienced power-electronics professional to create a compact voltage-isolation module for...

HL-39946321

PE Analysis of Fluke Data 1736 Load Study Data

I already completed a seven-day logging session with a Fluke 1736 and have the native .f4p files ready. What I need now is a licensed Professional Engineer who...

HL-39946022

AI Conversation Assistant Wearable Prototype

An invisible, AI-powered wearable will whisper real-time insights—fact-checking, conversation prompts, and subtle reply suggestions — while I continue hearing t...

HL-39946003

Fibre Home Network Setup

I’m upgrading my house to a fibre backbone so video calls and remote-desktop sessions run flawlessly. I already have a few specific brands and models in mind, b...

HL-39945795

Compact Single-Layer HV Signal PCB

I need a one-layer PCB, smaller than 5 cm × 5 cm, that takes a low-level control signal, divides it with a 4020 counter, passes it through a MOC3041 opto-triac...

HL-39945708

CO2 Flow System – Guidance on Differential Pressure Sensor and Tubing Setup

I’m looking for an engineer experienced with small pneumatic or CO2 flow systems to provide guidance on setting up a differential pressure–based flow measuremen...

HL-39945537

Schneider BMS Connectivity Review

I need a seasoned Schneider Electric (or Automated Logic) professional to sit with me in short, daily remote sessions and walk through the basics of how my MEPs...

HL-39945437

Solar Design Review and Stamping

I need a professional to review and stamp our electrical design for a 295kW commercial solar project. Requirements: - Comprehensive review of electrical design...

HL-39945344

Spare Parts Sourcing/Procurement for Manufacturing companies

I need support securing reliable mechanical/electrical, hydraulic MRO spare parts procurement professionals for manufacturing operations. I already know the exa...

HL-39944188

مطلوب مهندس ميكانيكا أو كهرباء محترف في Autodesk Civil 3D

مطلوب مهندس ميكانيكا أو كهرباء محترف في Autodesk Civil 3D لتنفيذ تعديلات على مخططات البنية التحتية (Infra MEP) نبحث عن مهندس ميكانيكا أو كهرباء محترف في Autodes...

HL-39943571

Diseño de PCB de 4 capas para dispositivo IoT con módulos RF y sensores.

Busco apoyo para transformar un esquema electrónico en una PCB de prototipo de 4 capas, tamaño mediano (aprox. 5–7 cm), con integración de varios módulos de com...

HL-39943816

Easygen 3500XT Paralleling Setup

I need my Woodward Easygen 3500XT-P2 fully programmed and commissioned so it can run in parallel with an existing generator. The work centres on three core capa...

HL-39943176

Precision KnifeBox Automation with Omron PLC

The KnifeBox is an automated dual-blade system that adjusts with high precision the opening between two knives, controlled by Omron NX102-1100 PLC via EtherCAT...

HL-39943407

Three-Storey MEP Drawing Package

I’m finalising a new three-storey residential development and need a complete set of coordinated MEP drawings. I already have detailed architectural plans in PD...

HL-39943075

PCB Design For AC DC Converter of 2 Channels and Multi Cut PCB

I need a production-ready PCB for a 250 W AC-DC converter that accepts a 230 ±10% VAC input and delivers a 2 channel 5.5 V DC and 5 V DC. Your job is to Design...

HL-39942917

Control System Design (MATLAB/SIMULINK) [Expert required only from PAKISTAN]

I am looking for MATLAB experts in the field of Control System Design I am looking for only Pakistani based electrical engineers I have lot of tasks and looking...

HL-39942519

Wecon PLC Automation Programming

I’m looking for an experienced Wecon PLC programmer to develop and commission the control logic for a manufacturing-automation line. The task includes: • Writin...

HL-39942036

Traditional Bath & Closet Upgrade

I’m ready to turn one full bathroom and three adjacent closets into TWO bathrooms and and three adjacent closets into a cohesive, polished space. In the bathroo...

HL-39942056

Fix Outdoor Party Audio Dropouts

During every party my music suddenly cuts out and then comes back a few seconds later. I’m running six outdoor speakers and three outdoor subwoofers, all wired...

HL-39942103

Designing mechanical shapes

Drawing shapes and components helps in the development of the mechanical industry.

HL-39942113

Surface-Mounted PM Motor Design

I’m developing a surface-mounted permanent-magnet motor for an e-bike and need an Ansys Maxwell specialist to carry out the electromagnetic side of the design....

HL-39941790

Urgent Residential Building MEP Design

I need a qualified MEP engineer to take my residential building from architectural plans to a fully coordinated set of Mechanical, Electrical, and Plumbing docu...