Finite Element Analysis projects

ID / Date Listing

CFD Mesh for Fluent

I will provide the complete CAD geometry and need a clean, simulation-ready mesh that I can load directly into Ansys Fluent. The model will be run as a turbulen...

HL-40072371

COMSOL Heat Exchanger Time Plot

I have already built a shell-and-tube heat exchanger model in COMSOL with a cross-flow arrangement and set it up for a transient study. What I now need is clear...

HL-40071689

Abaqus DEM Model Setup Support

This project focuses solely on the model-setup phase of a Discrete Element Method (DEM) simulation in Abaqus. I already have the physical problem defined; what...

HL-40067426

24hr SolidWorks FEA - $100

I will send you the native SolidWorks 2025 parts/assembly and all relevant load magnitudes as soon as we start. The components are steel and will be held with f...

HL-40066453

Static Stress Analysis of Steel Bollard

I need a static stress analysis for a steel bolted bollard. The analysis should consider the following loads: - Axial load - Shear load - Bending moment Ideal s...

HL-40066024

COMSOL 3D Transformer Modeling Guidance - 15/12/2025 05:31 EST

I am advancing a PhD project on high- and medium-frequency dual-active-bridge / solid-state transformer design and now want to tighten the COMSOL side of my wor...

HL-40065271

High-Efficiency BLDC Rotor Optimization

My existing washing-machine drive uses a 12-slot, 8-pole, spoke-type BLDC rotor that already meets torque and acoustic targets, yet there is still headroom to r...

HL-40063931

LS-DYNA Rockfall Impact on Reinforced Concrete Simulation and Validation -- 3

What I need from you is a full-scale LS-DYNA model that captures a rockfall striking a reinforced-concrete target and experimental validation. Primary objective...

HL-40063260

ANSYS CFD Simulation – Oil Flow, i do the simulation but i need from you to find all variable i need, its small project

I need an experienced ANSYS user to set up and run a full fluid-dynamics simulation with oil as the working medium. All geometry and boundary-condition details...

HL-40061251

PLAXIS 2D Model Verification for Footing on Contaminated Sand

I need a geotechnical engineer proficient in PLAXIS 2D to verify a model regarding the settlement behavior of a strip footing on oil-contaminated sand slopes. K...

HL-40061313

Static Stress Verification via FEA

I will share the complete native SolidWorks assembly along with a loading diagram and a sample calculation template. The task is to run a rigorous static stress...

HL-40060879

Biomass Combustion CFD Optimization

I need a detailed CFD study that zeroes-in on how our biomass-fired system burns solid fuel and, above all, how its combustion efficiency can be improved. The s...

HL-40058532

Propeller Aerodynamics: Cruise and Hover

I need a complete CFD study of our propeller in both cruise and hover regimes. You will receive a clean CAD model and the operating conditions; from there I wan...

HL-40057328

SolidWorks Strength Calculations

The Solid is finished and sitting in SolidWorks; what I’m missing is the full “paper” side of the project. I’ll give you the native SolidWorks files plus a Word...

HL-40056884

Autonomous Hybrid Amphibious ATV Design

I want to take an idea and turn it into a complete engineering package for a fully autonomous, electric-diesel hybrid ATV that can haul 200 kg through swamps an...

HL-40056724

FEA for 3D Space Truss Small aircraft fuselage weldment

I have a mesh-able 3d model of a common proven design of the aft portion of a small aircraft fuselage. With a static load at one point, independently in +/- Y a...

HL-40056104

Experto en diseño y calculo de piezas de fibra de carbono: elementos finitos

En Azcatec, una ingeniería con más de 25 años de experiencia en el sector y un fuerte carácter innovador y proyección internacional, con sede en Sevilla, busca...

HL-40055462

Seeking Professionals Experienced in Seismic Data Processing (2D/3D) – VISTA / ProMAX / SU / PSTM / PSDM

Seeking Professionals Experienced in Seismic Data Processing (2D/3D) – VISTA / ProMAX / SU / PSTM / PSDM Description: I’m looking to connect with professionals...

HL-40055342

ANSYS Structural Analysis of CAD Model

I need a structural analysis using ANSYS Workbench on a simplified CAD model of a GIGA Press. The focus is on stress and strain analysis under static and dynami...

HL-40054552

SolidWorks 3D Assembly Static Stress Analysis

I have a complete 3D design already modelled in SolidWorks, and I now need a rigorous static stress analysis to verify three key elements of the assembly: the s...

HL-40052123

Wing Repair Connection Capacity Analysis

I need an experienced aerospace engineer to run the numbers on a specific connection point of an aircraft wing before I green-light a repair. You will receive t...

HL-40051190

Journal Paper on Car Fabrication -- 2

I need an experienced academic writer with a strong background in engineering or technical research writing. The work involves converting an existing detailed o...

HL-40050718

PEMB Structural Analysis Expert

I'm seeking a skilled PEMB engineer to perform structural analysis on a commercial building project. I have detailed blueprints ready for your review. MUST BE A...

HL-40049741

CFD Analysis for Large CAD

I have a single CAD part that measures roughly 600 × 400 × 150 mm and I need a quick but reliable computational fluid dynamics run on it. The geometry is comple...

HL-40049541

CFD Optimization for Fan Efficiency

Our in-house R&D team has an existing axial-flow household fan that needs a measurable lift in airflow efficiency. I will supply the current 3D CAD files, motor...

HL-40048739

Arena & Simio Simulations

I have two independent problems that need to be modelled and analysed: one must be built in Arena Simulation 2022, the other in Simio. Both scenarios are alread...

HL-40047012

Resolve COMSOL Heat Exchanger Convergence

I built a time-dependent COMSOL Multiphysics model of a compact heat exchanger, but the simulation stalls with convergence problems once the solution reaches th...

HL-40045735

EMV Power Side-Channel Analysis

We are looking for a Machine Learning expert with proven experience in Side-Channel Analysis (SCA) to help build a full ML pipeline capable of extracting sensit...

HL-40045063

Aspen HYSYS Steady-State Simulation Setup

I have a new chemical-process model that needs to be built from scratch in Aspen HYSYS, and I want an expert to walk me through—or directly create—the initial s...

HL-40044394

Ansys Fluent CFD Specialist Needed

I'm seeking an experienced Ansys Fluent expert to assist with CFD simulations, specifically focusing on turbulent flow. The project involves: - Solver Setup and...

HL-40043333

Urgent Footpeg CAD & FEA

I need a compact motorcycle foot-peg bracket modelled in Fusion 360 from scratch and analysed right away. The material is Aluminium, and I’ll supply the exact o...

HL-40042625

Storm Drainage Report Creation -- 2

I need a comprehensive storm drainage report. The report must include: - Drainage area calculations - Hydraulic analysis - Impact assessment - HEC2 program mode...

HL-40040534

Truss Deflection Expert Consultation

I need expert guidance on member-specific deflection points in steel trusses. Ideal Skills and Experience: - Structural engineering background - Expertise in st...

HL-40038965

3D Mechanical Model With FEA

I have a mechanical component that first needs to be turned into an accurate 3-dimensional CAD model and then run through a full finite-element analysis. I will...

HL-40037101

ANSYS Non-Linear Structural Simulation

I'm seeking an experienced ANSYS professional to conduct a non-linear structural analysis. The focus will be on material non-linearity, specifically plasticity...

HL-40037121

Shear Wall and Tall Wall Detailing

I need structural engineering calculations for shear walls and tall walls in a residential building must be stamped for Idaho . Requirements: - Detailed structu...

HL-40036606

Automated Divider and Packer Machine Design

I need an automated machine designed specifically for dividing and packing sand and mining minerals. Key requirements: - The machine should be able to handle bu...

HL-40035512

Design Industrial Manufacturing Equipment

I have an early-stage concept for a piece of industrial equipment whose sole purpose is to streamline a manufacturing line. The idea is clear in my head and rou...

HL-40030525

Rotational TENG COMSOL Simulation

I am running a study on a rotational triboelectric nanogenerator (TENG) and need a COMSOL-based model that mirrors my lab results almost point for point. Above...

HL-40029539

CFD Simulation of Water Evaporation

I need a multiphase CFD simulation to study the evaporation of water in a capillary tube at room temperature. The simulation should focus on: - How the meniscus...