Web|Software|Desktop|Mobile developers. Find a remote job.

I need someone to help me finish my master's thesis. The job is about retrofitting coupling beams using FRCM (fiber-reinforced concrete matrix). I have been working on it for two years and all the experiments are done. I need someone to help me finish the writing task.

help required with modelling on abaqus

10×60 L shaped deck with a staircase to the ground

I want to estimate the number of cycles/ stress intensity factors SIF and the corresponding crack extension rate to establish paris law for the given material under uniaxial loading. The sample has and edge crack (with symmetry boundary conditions) and a notch (hole) right to the crack edge.

A concrete frame of a reinforced concrete should be designed under monotonic load in Abaqus. Validation should be done completely.

A model that needs to be debugged for contact details and convergance

i want fem modelling of CFDST using ABAQUS

To study the effect of different parameters on the hardening flow curve and forming behavior of AA5182-0 rod will be studied using ABAQUS / Explicit package

Need user material code for shape memory polymer material that will be used in Abaqus and Ansys for modeling and simulation. For any queries contact me on WhatsApp-8090331327

Need user material code for shape memory polymer material that will be used in Abaqus and Ansys for modeling and simulation. As this is a special kind of material, one must be familiar with the models and relations used to simulate SMP's shape memory behavior to generate user mat code. If any details are required from my end please contact me. Thank You

ทำ finite element ใช้โปรเเกรม abaqus เจาะรูที่ทรงกระบอก เเล้วหาตำเเหน่งที่เหมาะสมทำให้ bucking ได้มาก สนใจ Critical load ก่อนเกิด bucking

This would be a simple simulation of a wall, containing some stones with their properties and a simulation of the binding material. I have a video of a similar stone wall that would help you complete it in no time.

friction stir welding of 6060-T6 aluminium using the parameters tool rotational speed 250 and welding speed 40 rotational speed 500 and welding speed 80

Modeling simulation and results. it's structural engineering based topic. software; abaqus

I’ve written a vumat to simulate a viscoelastic behaviour with progressive damage. The subroutine works fine until there is large pressure in the element (in a single element case) and the damage starts to slightly increase the element deformation rate. There should be something wrong with the damage formulation. I need someone who is experienced in writing vumats for Abaqus to have a look at the code and resolves the issue.