Prototype Developer Needed for Vision Tech
Computer Vision Prototype Needed — Head Tracking & Auto Zoom (R&D Phase) I’m building a product and am currently in the early R&D phase before final hardware an...
Read moreComputer Vision Prototype Needed — Head Tracking & Auto Zoom (R&D Phase) I’m building a product and am currently in the early R&D phase before final hardware an...
Read moreI’m building a smart irrigation setup that links a Raspberry Pi edge server with several ESP32 nodes in the field. Each ESP32 gathers data from soil-moisture pr...
Read moreI want to build a compact, two-way Bluetooth audio interface for a HAM radio. The core goal is a 2-way bridge between the radio and a realtime camera running on...
Read moreNecesito plasmar en una sola placa todo el sistema de control para seis tiras LED RGBW independientes basadas en el driver 2415F (protocolo de 2 hilos: Data + C...
Read moreI'm seeking an experienced PLC programmer to convert my existing SLC500 process control system to a Click PLC. The SLC500 is obsolete, and I need to ensure cont...
Read moreI already have a working ESP32 design in KiCad and need it brought to its final, production-ready form for a commercial product that must clear CE. The job cent...
Read moreI am looking for an experienced RF hardware designer to consolidate and miniaturize an existing RF system based on a MYIR Zynq-7020 board. The current setup inc...
Read moreI’m building a mini ventilator—an embedded medical device combining mechanical and electrical subsystems—and I’m looking for a dependable partner who can transl...
Read moreI’m developing a small “suiveur solaire” that pivots a solar panel like a robotic arm. The build is Arduino-based and must deliver three key capabilities: • Obj...
Read moreI’m building a small bionic butterfly that “flips” in mid-air, powered by an ESP32-S3 Super Mini. What I still need is the full control system: firmware for the...
Read moreI have an ESP32 based product that should maintain a steady Wi-Fi link, yet on my home network it keeps dropping off and taking too long to re-associate. Stabil...
Read moreI need an experienced PLC programmer to develop a process control system using ABB AC500 PLCs. The programming should be done in Ladder Logic (LD). Key Requirem...
Read moreSamsung phone has data problems. Can you help? Telco has not helped much. Will need to work with me over the phone in english.
Read moreHello , I need a complete design for a compact consumer-electronics board that revolves around a PIC microcontroller. The scope spans three tightly-linked parts...
Read moreI have individual, validated firmware blocks for the STM32L432KBU6 that handle an LIS3DH accelerometer (interrupt-driven), an EM4095 RFID front-end, the MCU’s i...
Read moreI already have a complete analog FM-transmitter schematic for 433 MHz (BFR93W transistor, electret mic front end, bias and tank network). What I need now is a c...
Read moreI have an air-quality monitor prototype on breadboard and now need a production-ready PCB. The core of the board will be an Arduino Nano, linked to Wi-Fi for cl...
Read moreI need a robust, well-documented software or a tool that lets the Zowee H155-381 operate with several SIM cards instead of only one. The job involves reverse-en...
Read moreI need an expert to develop embedded algorithms for our OWLY predictive maintenance platform. The platform uses fused vibration and acoustic sensing to detect e...
Read moreI need a complete design for a compact consumer-electronics board that revolves around a PIC microcontroller. The scope spans three tightly-linked parts: • PCB...
Read moreI need an experienced electronics/PCB engineer to design a reliable, 24/7-operating traffic light controller PCB. This is a safety-critical system (not a hobby...
Read moreI’m embarking on an ambitious project to launch a pair of operating systems — one for mobile devices and one for desktop / laptop computers. I deliberately chos...
Read moreigid-Flex PCB Design for Smart Ring Wearable I’m developing a compact smart ring device and need an experienced PCB engineer to design a rigid-flex PCB. The des...
Read moreI need help building a working prototype of a small interactive toy. The prototype requires: A pop-up mechanism (using solenoids, springs, and/or small motors)....
Read moreWe are looking for an experienced developer to build a small Linux utility that communicates with a U.2 NVMe SSD over SMBus (NVMe-MI). The project involves low-...
Read moreI need a control system for an RO (Reverse Osmosis) water filtration setup. The system should manage a water pump, measure the depth of water in a tank, and int...
Read moreBusco a una persona con sólida experiencia en IoT y algoritmos de inteligencia artificial para crear un sistema domótico completo. El proyecto incluye: • Diseño...
Read moreWe are looking for an experienced Product Design Engineer (Mechanical + Electrical) to lead the prototyping of a high-end, silent benchtop cocktail machine. Unl...
Read moreI’m building a small sports POV camera system (VisionCam V1) using a Raspberry Pi Zero 2 W + Raspberry Pi Camera Module 3 Wide (IMX708). I need (A) a simple pow...
Read moreOverview I’m looking to develop a robust UART to UDP bridge on STM32 for handling large binary frames and NMEA data. The aim is to enhance data transmission rel...
Read moreI need an experienced electronics/PCB engineer to design a reliable, 24/7-operating traffic light controller PCB. This is a safety-critical system (not a hobby...
Read moreI am looking for an experienced electronics engineer/PCB designer to create a custom carrier board (or fully integrated PCB) for a smart beekeeping monitoring s...
Read moreI am embarking on a full-stack build of a humanoid companion robot whose number-one mission is caring for an infant from birth through age five. Beyond the usua...
Read moreI already have a working PCB built around an Xsens MTi-630 IMU and an NXP MKV56 microcontroller. What I need now is a technician who can revise the existing fir...
Read moreI’m building a CM5-based camera system and need an experienced hardware engineer to design a custom CM5 carrier board that supports an M.2 2230 A+E (PCIe) AI ac...
Read moreI need a robust, well-documented software or a tool that lets the Zowee H155-381 operate with several SIM cards instead of only one. The job involves reverse-en...
Read moreI'm looking for a simple laser tag prototype using ESP32 and IR technology. This is for concept testing, not a final product. Essential features: - Scorekeeping...
Read moreI have an ESP32 driving a 2.8-inch SPI ILI9341 TFT that contains an on-board SD slot. With the standard lcd and sdcard MicroPython drivers the display runs perf...
Read moreWe have multiple FJD Trion P2 3D scanning devices in the UK that cannot complete firmware upgrades via the device’s built-in web/browser UI. The upload step suc...
Read moreJe souhaite développer un système embarqué destiné à l’automatisation domestique. L’objectif est de concevoir une carte compacte capable de dialoguer, via des m...
Read more