M.Tech Embedded Systems Project with Conference Paper Submission
Description: I am looking for an experienced freelancer to develop a complete M.Tech-level project in the domain of Embedded Systems — from concept to implement...
Read moreDescription: I am looking for an experienced freelancer to develop a complete M.Tech-level project in the domain of Embedded Systems — from concept to implement...
Read moreI need Arduino Pro Micro code to control a butterfly robot with flapping wings. The robot will be powered by servos and controlled via remote control. Key requi...
Read moreI have a Raspberry Pi 4 that needs to boot cleanly from the current PiSDR image. Once the board is up and proven stable, I want the connected peripherals config...
Read moreHello, I am looking for a modded BIOS for my ASUS Z97-PRO (Wi-Fi AC). I am currently on the latest official version 3503. I have 3 specific issues that require...
Read moreProject Summary We need a senior developer or small senior team to build a production-grade web platform connected to ESP32-based devices via secure MQTT. This...
Read moreI am developing an outdoor, sequential rain-sampling station and want a complete STM32-based solution that I can send straight to manufacturing and field-test....
Read moreI need a clean, well-documented Linux kernel module in C that supports the TMP102 I2C temperature sensor on kernel 5.x and newer. The driver must initialise the...
Read moreI have an optical‐sensing board that is already architected at block level and now needs to move fast into hardware. The immediate work spans three linked stage...
Read moreSubject: Prototype Request – RC Control Station with Large Display (Followed by Bulk Order) Hello, I am developing a commercial interactive entertainment system...
Read moreI’m developing a commercial product that relies on a set of interactive elements—sensors, motors and LED displays—and I need clean, production-ready schematic d...
Read moreI’m setting up a motorised gimbal for my DSLR and need it to lock-on and keep a chosen subject centred while I film. The solution can rely on computer-vision, h...
Read moreI already have a working codebase that talks to a three-axis gimbal, issuing basic movement commands just fine. What’s missing is true automation: I want the sy...
Read moreI need an electronics engineer to design a complete circuit schematic and PCB layout within a 95 mm × 95 mm board size. The PCB will integrate an ESP developmen...
Read moreWe are looking for a high-level Electronic Engineer to take over and complete a Pipe Inspection Robot project. System Architecture: Robot Unit: 4x 24V Drive Mot...
Read moreWe are launching a new CCTV-camera venture and my first priority is to bring an experienced electronics technician onto the founding team. From day one you’ll o...
Read moreI need a kernel-space device driver written for a communication module that sits on an NXP i.MX-based custom board. The target platform runs a 4.x Linux kernel,...
Read moreI have a completed KiCad schematic and need an experienced PCB layout engineer to create a manufacturing-ready PCB layout. I will provide the KiCad project file...
Read moreI need to take an existing schematic for an industrial-grade board and turn it into fabrication-ready files. The design mixes SMD and through-hole parts, and it...
Read moreI am building a gaming-focused DMA solution that pairs custom FPGA/PCIe firmware with a Windows host application capable of safely reading live game memory—spec...
Read moreOur current board is a stack-up of four discrete modules—a POE extractor, 5 V and 12/24V DC/DC stages, and the WT32-eth01 MCU/PHY. I now need all of that logic...
Read moreI have a commercial IR-band Laser device with two output power Modes: NORMAL or full-power, and TRAINING, or restricted power. These modes are NOT user-selectab...
Read moreI have an AI-integrated PCB that communicates over Bluetooth and is destined for wearable devices. Its core role is automated control of those wearables, with n...
Read moreI'm looking for an experienced C++ developer to update existing code on an ESP32 device. Currently the device operates a pump and fan according to some schedule...
Read moreI am developing a self-propelled, ball-shaped reconnaissance robot that must roll freely indoors and outdoors across mixed terrain, stream or log data, and retu...
Read moreDevo realizzare un piccolo sistema, alimentato a batteria, che con un Arduino Uno rilevi temperatura e umidità di tre arnie e dell'ambiente esterno. L'installaz...
Read morePlease clone the official Home Assistant Operating System repository (https://github.com/home-assistant/operating-system) and run the complete build so I receiv...
Read moreTo create a smart hadicaped stick, A pdf will be shared accordingly Requires to be a Mauritian, as it is a physical project.
Read moreI need a hands-on hardware specialist who can deliver a fully functioning prototype that listens on the 2.4 GHz band, recognises drone control traffic, and trig...
Read moreI need a complete design for a compact consumer-electronics board that revolves around a PIC microcontroller. The scope spans three tightly-linked parts: • PCB...
Read moreWe are seeking an experienced Firmware Engineer to lead the development of embedded software for next-generation industrial IoT systems. The role involves worki...
Read moreI need a complete design package for a grid-tie hybrid solar inverter rated anywhere between 1 kW and 5 kW for continuous industrial duty. The unit must seamles...
Read moreDSP Firmware Engineer – RPM Measurement (TI C28069) Overview: We are seeking an engineer with hands-on experience in TI C2000 DSP firmware maintenance, for RPM...
Read moreFreelance PCB Designer Needed — Compact BLE Handheld Device We are looking for an experienced freelance PCB designer / electronics engineer to complete the sche...
Read moreI am enclosing the technical specifications in two languages: Russian and English. Прилагаю техническое задание на двух языках: русский и английский Need an exp...
Read moreWe are developing a compact, reusable camera engine (the CVE) for use across multiple applications. The CVE is a two-board stacked module that interfaces with a...
Read moreI am looking for an experienced PCB designer to complete routing for my router PCB project. The design is based on the STM32 Blue Pill (STM32F103C8T6). I alread...
Read moreI’m maintaining a small Go utility that manages ZTE MF79U USB modems. Every call I make to the firmware’s reboot API is accepted—yet the device never actually r...
Read moreI have a PCB design that now needs a round of component swaps—specifically the main microcontroller. All other aspects of the board stay the same; I only need t...
Read moreThis is for US or Canada designers ONLY. If you are not in the US or Canada please don't reply. I am not interested in working outside North America. We will do...
Read moreI have sketched out Vaami—an elegant, pocket-sized gadget that lets people exchange full voice and text messages anywhere, even across countries, without a smar...
Read more