Calibration Software

I'm looking for a programmer to program a Busellato Jet 3006 CNC Router - Genesis Software. Please reply ONLY if you are proficient and had knowledge with this machine. Thank you, Al

We nead to made a program for SAS board Simulator, based on arduino nano

Proyecto en tinkercad(arduino) con matlab

Have to complete a LabVIEW program within 3 hours

This project consists of 6 of tasks . I experimentally measured 13 different Nano-composites in Electrical (dielectric strength ) and Mechanical test (tensile strength) for each composite. The dielectric strength test was performed 10 times for each Nano-composite type to improve the accuracy in 6 different conditions ; the software should calculate the average of the 10 results and work on the average value for each condition. The Tensile Strength test was performed 3 times for each Nano-composite, the software…

This project consists of 6 of tasks . I experimentally measured 13 different Nano-composites in Electrical (dielectric strength ) and Mechanical test (tensile strength) for each composite. The dielectric strength test was performed 10 times for each Nano-composite type to improve the accuracy in 6 different conditions ; the software should calculate the average of the 10 results and work on the average value for each condition. The Tensile Strength test was performed 3 times for each Nano-composite, the software…

Hello I need an expert in Raspberry Pi and Matlab Please apply if you have the required expertise.

Matlab and arduino connection project

1. The partial step velocity (u *, v *) is calculated by Eqs. (4) and (5). 2. The values on the 1/2 grid of the partial velocity are obtained by linear interpolation (in this case, the average). The right-hand side source term of the pressure equation (12) is calculated using the partial step velocity on the 1/2 lattice, and the convergent solution (pn) of the equation (12) is obtained by the SOR method. 4. Using the obtained pressure, the first-order…

1. The partial step velocity (u *, v *) is calculated by Eqs. (4) and (5). 2. The values on the 1/2 grid of the partial velocity are obtained by linear interpolation (in this case, the average). The right-hand side source term of the pressure equation (12) is calculated using the partial step velocity on the 1/2 lattice, and the convergent solution (pn) of the equation (12) is obtained by the SOR method. 4. Using the obtained pressure, the first-order…

The work tries to create a small project with Labview with a free statement that must be written, with an explanation of the operation and why of the components and with the graphic of this. As an example I am attaching a document so you can see how it is.

To do some work in designing lab view

Looking for someone with experience in Labview and PID control for self balancing robot application.

Looking for someone to design an arduino project; including what parts I need, circuit diagram and the code. Pref to use Arduino Nano and a small display screen to save space. What I would like it to do: I would like a device that can be triggered by EMF/Magnetic field detection. Fluctaution/detection triggers the device to speak a random word from its library, and to also display this on a small screen. It would also be great if when the…

I'm looking forward to having a quotation for testing the Syringes to get the ISO product certification for Piston Syringes / Insulin Syringes. (Attachment Have more Clear Details. Required certificates. 1) ISO 8537 2) ISO 7864 3) ISO 9626 4) ASTMF 3212-16 5) ISO 7886-1 6) ISO 7886-2 7) ISO 7886-3 8) ISO 594-1 9) ISO 594-2 10)ISO 10993-4/5/10/11. Biocompatibility Report 11)ISO 11608-2 12)ISO 11608-3 13)ISO 11608-1 14)ISO 11135 Sterilization test Thank you