Controller Area Network (CAN)

Support Canopen, J1939 Via Rs485
We have a generic multi-port RS485 board. It supports Modbus RTU/ASCII. We need it to emulate Can CanOpen , J1939 (CAN) Master, via software. We have several CAN slave devices that need to be connected and communicated with, via the RS485 port. Modbus will not be used. Need you to develop code in MS Visual Studio and also for C (for embedded systems) for this purpose. This should not require any HW modifications to the RS485 board we have, nor…
Full Description of support CanOpen, J1939 via RS485
Canbus Communication Using Can Isotp
I want to use this library https://github.com/hartkopp/can-isotp anyone can help me with that he just has to know how to use this library everything is explained inside
Full Description of CANBUS communication using CAN ISOTP
Can Bootloader Development
The job entails developing a bootloader in C for an Automotive product. The bootloader should: • be updatable over CAN (through UART) • be stable • support UDS commands Write by Identifier, Read by Identifier This will be an initial bootloader, and as such will not need to support update hashing and encryption at this time. These features will be added at a later time. We will provide the PCBs for development, as well as USB-CAN tools and Windows Update…
Full Description of CAN Bootloader Development
Powervision Studio Pv380 Programming
I need someone experienced with Power Vision Studio to help me configure a PV380 screen and IX3212 PDM.
Full Description of Powervision studio PV380 programming
Requesting Vin Number Using Isotp - Canbus
I would like to know how to request a VIN Number from c++ code I have this code for example I can send a message but I want to send a request message for VIN Number for example, I have the following code to send and read long messages using ISOTP CAN messages int main(int argc, char **argv) { char dataReceive[64] ; /////////////////// int s = socket(PF_CAN, SOCK_DGRAM, CAN_ISOTP); struct ifreq ifr; strcpy(ifr.ifr_name, "vcan0"); ioctl(s, SIOCGIFINDEX, &ifr); // ifr.ifr_ifindex gets…
Full Description of requesting VIN number using isotp - CANBUS
Can Bootloader Development -- 2
The job entails developing a bootloader in C for an Automotive product. The bootloader should: • be updatable over CAN (through UART) • be stable • support UDS commands Write by Identifier, Read by Identifier This will be an initial bootloader, and as such will not need to support update hashing and encryption at this time. These features will be added at a later time. We will provide the PCBs for development, as well as USB-CAN tools and Windows Update…
Full Description of CAN Bootloader Development -- 2
Can Bootloader Development -- 3
Job: CAN Bootloader Development The job entails developing a bootloader in C for an Automotive product. The bootloader should: • be updatable over CAN (through UART) • be stable • support UDS commands Write by Identifier, Read by Identifier This will be an initial bootloader, and as such will not need to support update hashing and encryption at this time. These features will be added at a later time. We will provide the PCBs for development, as well as USB-CAN…
Full Description of CAN Bootloader Development -- 3
Build Partially Reconfigurable Can-fd Software
1, Partially configurable CAN-FD software including documentation that describes how to configure it and an actual frames description for the AI controller. Key aspect is speed at maximum 2ms. 2, Sensors reading/ motors control software integrated with CAN-FD software that is fully integrated (including functionality and speed testing) Reconfigurability enables us for example quickly change the sensors and appliances.
Full Description of Build partially reconfigurable CAN-FD software
J1939 Can 2way Communication Simulink
Hello I need someone with experience with vehicle CANBUS network J1939. I have an combustion engine control unit here on my desk, connected with a PEAK can usb adaptor. J1939 communication is set up and working with PcanView, Busmaster and simulink. I am using simulink for datalogging of this engine control unit, and the logging is working fine. What i need is: Not all variables is avaliable on the J1939. There are more engine variables i need to log than…
Full Description of J1939 CAN 2way communication Simulink
Gps-3g-4g Real Time Tracker
Looking for exper in real time gps/ 3g 4g real time tracker. Requests are: good knowledge of gps / 3g / 4g modules localization on google maps user database for storing the trace (sql or other good database) implementation of some alarm functions (displacement respect to the parking position) or based on an impulse provided by an external signal possibility to control a hw output for example for remote vehicle stop browser and mobile app (iphone and adroid) possibility to…
Full Description of Gps-3g-4g real time tracker
© 2006 — 2024 hirelancer.com is an affiliate website, listing the freelance projects. We are collaborating with other sites like getFreelancer.com. Feel free to bid on any project and good luck! You will need register first, before bidding or posting projects. Basic memberhsip is always free. We might earn commissions from referring you. You will never ever pay additional fees for we referred you.