Web|Software|Desktop|Mobile developers. Find a remote job.

Simple digital electronics problems

I want to build a device (datalogger) that measures/collects data of the following parameters: -acceleration (x, y, z) -angular speed (x, y, z) -temperature -pressure -humidity -intensity of gamma radiation Your task is to list the correct sensors for this device and draw a correct algorithm diagram (power consumption, timing/schedule, etc) for its usage. **Note: I just need names and models of the sensors and the algorithm diagram so I can start making the device and I’m willing to pay…

I have some problems that are realated on applied electronics and measurements course . Please write me who is really expert on that field . I will check you talent first then hire otherwise dont write

Input power: 60vdc nominal Frequency Response: 1hz-100khz, +0db -1db Input sensitivity: 1v Power: 600w minimum @ 8ohms Gain: 40db (without clipping) Impedence : 8ohm – 0.5ohm .05% THD or less Signal to noise ratio: 110db Damping factor 180 Quad push pull amplification design with three stage Darlington circuitry to reduce distortion (or equivalent). Have required protection for circuit and for output . Allowance for a increase voltage of up to 40% (circuit should able to handle the increase and simply…

I have several projects for electrical engineering graduates/students. Please bid only if you are good in theory and math problems.

I have some works to be done. Electrical engineers/students needed. Please bid if you are good in theory.

I need someone who can help me remotely to read the sms using sim868 and esp32 using AT commands. The problem is i m receiving incoming message but when I tried to read it with At+CMGR or At+CMGL, sms not showing...only OK response is showing.

the system should have small lcd that shows temperature , eeprom,rtc,usb to upload the saved temperatures on excel sheet

i need to make a pcb for temp data logger that has lcd to show temperature , eeprom to save the temperatures, rtc, usb to upload the saved temperatures to an excel sheet with the time and date ,

i have some work related to schematic diagram. i need a one who has good experience of pspice

I would like a digital alarm clock which does not have any snooze features. Ideally this alarm clock would allow for two different alarm times. I want a physical alarm clock, not an app. You can ship the clock to me. I would also like it to plug into the wall, with battery backup. If I could somehow connect/time my string lights with the alarm that would be good too.

Using P4S-341 make a webserver in order to read status of ds18b20 sensor

Hi I have a circuit diagram and need to simulate it as a waveform using quartus II app. and the other is add the diagram and draw out as a schematic drawing. DM me.

looking to build a prototype which uses motion sensors to detect hand motion. based on the type of hand motion (lets say 3 hand waves for example), turns on the camera. the image processing unit should process the image in real time and indicate if it was a hand or any other object. the camera, battery and sensors are expected to be all micro size, to be able to fit in a wrist band.

Electrical or Electronics engineer required having expertise in Mplab. Only Freelancers from Pakistan. New freelancers are encouraged to apply