HVAC Pipe Welding Expert Needed
Budget: ₹12,500 – ₹37,500 INR
I have a run of HVAC lines fabricated in MS Class C mild-steel that now need to be fully welded and made pressure-tight on site. Because the pipework interfaces with existing equipment, the joints vary in position and orientation, so I need someone who is equally comfortable laying strong beads with MIG, TIG, and stick/arc depending on access and thickness.
You do not need to hold an AWS or ASME ticket for this job—skill and a clean, leak-free finish are my priorities—but please mention any credentials you do have so I can schedule inspections efficiently.
Deliverables
• All assigned MS Class C pipe joints welded, cleaned, and ground flush where specified.
• Welds must pass a visual inspection and a pressure test at operating-plus-10 %.
• A brief weld log noting process used, filler metal, and parameters for each joint.
If you have the gear to switch smoothly between processes and the experience to keep distortion and spatter to a minimum, let’s talk dates and footage so we can get the air-handling system online without delay.
You do not need to hold an AWS or ASME ticket for this job—skill and a clean, leak-free finish are my priorities—but please mention any credentials you do have so I can schedule inspections efficiently.
Deliverables
• All assigned MS Class C pipe joints welded, cleaned, and ground flush where specified.
• Welds must pass a visual inspection and a pressure test at operating-plus-10 %.
• A brief weld log noting process used, filler metal, and parameters for each joint.
If you have the gear to switch smoothly between processes and the experience to keep distortion and spatter to a minimum, let’s talk dates and footage so we can get the air-handling system online without delay.