Expert MIG & TIG Welding
Budget: €12 – €18 EUR
I need a skilled welder who is comfortable switching between MIG and TIG techniques to join heavy-gauge steel sections—each piece is thicker than 10 mm. The job demands clean, full-penetration welds with a consistent bead profile and minimal distortion so the finished assembly is ready for machining and final fit-up.
Deliverables
• All steel joints completed using the most suitable mix of MIG and TIG as agreed before each run
• Welds ground or brushed only where necessary; otherwise left as-is for inspection
• Parts returned free of spatter and securely packaged
Acceptance criteria
• Visual inspection shows uniform fusion along every seam
• No undercut, porosity, or cracks when tested with dye penetrant
• Dimensional tolerances on the mating faces remain within ±0.5 mm after welding
If you have the equipment to handle thick plate work and can meet these quality checks, please let me know your typical lead time and any questions about joint preparation or fixturing.
Deliverables
• All steel joints completed using the most suitable mix of MIG and TIG as agreed before each run
• Welds ground or brushed only where necessary; otherwise left as-is for inspection
• Parts returned free of spatter and securely packaged
Acceptance criteria
• Visual inspection shows uniform fusion along every seam
• No undercut, porosity, or cracks when tested with dye penetrant
• Dimensional tolerances on the mating faces remain within ±0.5 mm after welding
If you have the equipment to handle thick plate work and can meet these quality checks, please let me know your typical lead time and any questions about joint preparation or fixturing.