Coloured drawing of a speedometer
Budget: $15 – $25 AUD
We want a drawing best described as looking like the front face of a speedometer with values 0 to 200, in steps of 20 marked around the perimeter rim. The perimeter rim, and the speed indicators from 0 to 80 red, 100 to 140 orange. At the 150 mark the rim changes to green to the 200 mark, The 160 to 200 indictors also change to green. The center of indicator to be white, width of the coloured rim 15mm.
On separate drawing we need a needle for the indicator. the needle will need wide enough at the base to allow a fixing screw for it to pivot on. The needle can be black
Both drawings need to be on a file that can be utilised by a everyday printing shop The final size of the indicator will be 200mm dia.However, the file soft ware must be such that the diameter can be changed. the attached pictur gives a very good picture of what we want.
On separate drawing we need a needle for the indicator. the needle will need wide enough at the base to allow a fixing screw for it to pivot on. The needle can be black
Both drawings need to be on a file that can be utilised by a everyday printing shop The final size of the indicator will be 200mm dia.However, the file soft ware must be such that the diameter can be changed. the attached pictur gives a very good picture of what we want.