VHDL Designer
Budget: $30 – $250 USD
This project requires the student to implement a 10-bit counter design using VHDL. The
counter will have the ability to count up and down from 0 and 1000. This requires the utilization
of 16 slide switches and the center push button of the Basys3 board. The 10 right-most switches
(SW0 – SW9) will be used to input a preset value to the counter or the ALU. SW0 represents
the LSB and SW9 represents the MSB of the input value.
The center push button (BTNC) is used as the manual clock for the counter. The count should
increase or decrease (depending on the selector switch, SW13) by 1 on every rising edge of this
button.
counter will have the ability to count up and down from 0 and 1000. This requires the utilization
of 16 slide switches and the center push button of the Basys3 board. The 10 right-most switches
(SW0 – SW9) will be used to input a preset value to the counter or the ALU. SW0 represents
the LSB and SW9 represents the MSB of the input value.
The center push button (BTNC) is used as the manual clock for the counter. The count should
increase or decrease (depending on the selector switch, SW13) by 1 on every rising edge of this
button.