I need a Solidworks Designer
Budget: $10 – $30 USD
dimensions supplied are only for building the part; they do not infer functional relationships
between features.
Create a detail drawing of the SHIFTER BLOCK on B-Size Format (11x17 landscape format). Use the views that you feel would be necessary to dimension the part. Include a pictorial view. Do not display TANGENT EDGES on the orthographic views.
Make a new layer for dimensions and centerlines with a color of your choosing. Add center marks and center lines as necessary.
The ¼-28 threaded hole should have a thread depth of .50 and a tap drill depth of .61. Use a complete thread callout in your drawing.
Size hole A to mate with a ∅. 3152 ± .0004 shaft with a maximum interference of -.0002 and maximum clearance of .+.0005
Specify the following geometric tolerances:
• The bottom of the part is Datum A and is flat to .001
• The back of the part is Datum B and is perpendicular to the bottom to .002.
• The right side of the part is Datum C and is parallel to the left.
• The 60-degree angled surface requires an angularity tolerance of .007 to datum A.
• Add the parallelism tolerance noted on the drawing.
between features.
Create a detail drawing of the SHIFTER BLOCK on B-Size Format (11x17 landscape format). Use the views that you feel would be necessary to dimension the part. Include a pictorial view. Do not display TANGENT EDGES on the orthographic views.
Make a new layer for dimensions and centerlines with a color of your choosing. Add center marks and center lines as necessary.
The ¼-28 threaded hole should have a thread depth of .50 and a tap drill depth of .61. Use a complete thread callout in your drawing.
Size hole A to mate with a ∅. 3152 ± .0004 shaft with a maximum interference of -.0002 and maximum clearance of .+.0005
Specify the following geometric tolerances:
• The bottom of the part is Datum A and is flat to .001
• The back of the part is Datum B and is perpendicular to the bottom to .002.
• The right side of the part is Datum C and is parallel to the left.
• The 60-degree angled surface requires an angularity tolerance of .007 to datum A.
• Add the parallelism tolerance noted on the drawing.