Simply Redesign Screen & Keyboard Structure
Budget: $10 – $30 USD
Simply redesign of screen and keyboard structure.
Project details:
1. The box should be accessible from the rear by dismantling the rear cover; the cover should be removable in such a way that the box can hang and mechanical interference with the electrical connections is possible. In the current solution, unscrewing the cover will cause it to fall to the ground because it’s the same component.
We need two separate components:
1) the rear cover as a separate piece,
2) the mount as a single piece with the screen.
2. The reinforcement between screen and keyboard is definitely too delicate; it need to be corrected to eliminate the issue of the screen being forced out.
3. Main assumptions: high-quality, vandal-resistant buttons - ONPOW 22mm 1 stop failure (22mm hole) ONPOW LAS1-AGQ-11TSB 2 power lamp (22mm hole) ONPOW GQ25-L-11 or similar 3-5 monostable buttons green, red, blue (hole 22mm) ONPOW GQ25-L-11 or similar 6 Touch screen - available in *.STEP file.
4. A pollen filter is required.
5. All should keep modern and high aesthetic design.
6. Required SolidWorks 2021 version or older one.
Project details:
1. The box should be accessible from the rear by dismantling the rear cover; the cover should be removable in such a way that the box can hang and mechanical interference with the electrical connections is possible. In the current solution, unscrewing the cover will cause it to fall to the ground because it’s the same component.
We need two separate components:
1) the rear cover as a separate piece,
2) the mount as a single piece with the screen.
2. The reinforcement between screen and keyboard is definitely too delicate; it need to be corrected to eliminate the issue of the screen being forced out.
3. Main assumptions: high-quality, vandal-resistant buttons - ONPOW 22mm 1 stop failure (22mm hole) ONPOW LAS1-AGQ-11TSB 2 power lamp (22mm hole) ONPOW GQ25-L-11 or similar 3-5 monostable buttons green, red, blue (hole 22mm) ONPOW GQ25-L-11 or similar 6 Touch screen - available in *.STEP file.
4. A pollen filter is required.
5. All should keep modern and high aesthetic design.
6. Required SolidWorks 2021 version or older one.