Designing a simple mesh in solidworks
Budget: $10 – $50 USD
Please refer to the attached file (Bal 2021) that just shows the dimensions of the filaments. Kindly note that I want the filament layers to intersect by ~0.5 mm at the overlapping points. The other 2 pictures are for the actual design (the one that we want to mimic and build again using solidworks).
I want to get three .STL files with the following dimensions:
A) length=92.1 mm× width=45.7 mm× depth=2.3 mm
B) length=9.21 mm x width= 4.57 mm × depth=2.3 mm
C) length=10 mm× width= 5 mm x depth =2.5 mm
Please also send me the source file.
I want to get three .STL files with the following dimensions:
A) length=92.1 mm× width=45.7 mm× depth=2.3 mm
B) length=9.21 mm x width= 4.57 mm × depth=2.3 mm
C) length=10 mm× width= 5 mm x depth =2.5 mm
Please also send me the source file.