Adapt existing FIX0473 SolidWorks part to new dimensions

Job ID: 30976489

Budget: $30 – $250 USD

FIX0473 is a 2-part split mold, in SolidWorks format.
Make the following changes:
1) remove one of three U-slots on the bottom and the accomanying bolt, nut, and washers
2) on both sides, remove one of three U-slots on the side and the accomanying bolt, nut, and washers
3) reduce internal length (cavity size) from 20.00" to 10.20"
4) decrease internal cavity thickness from 2x 1.250" to 2x 0.85"
5) reduce wall thickness (large walls) from 3.25" to 1.625"
6) reduce length of well at the bottom of the mold from 7.00" to 6.0" long
7) reduce height from 10.25" to 6.25"
8) change material type to A36 LOW CARBON STEEL
9) maintain distance between each of the two 2X 1-8 UNC x 1.25 DP holes