Adapt existing FIX0473 SolidWorks part per ENG0168
Budget: $30 – $250 USD
FIX0473 is a 2-part split mold, in SolidWorks format.
So is ENG0168, but is in 2D format as a DXF/DWG.
Using ENG0168 as a guide, rename FIX0473 as ENG0168 rev 1, change:
1) remove one of three U-slots on the bottom and the accomanying bolt, nut, and washers
2) reduce internal length (cavity size) from 20.00" to 10.00"
3) reduce internal thickness from 2x 1.250" to 2x 1.00"
4) reduce wall thickness (large walls) from 3.25" to 1.625"
5) reduce length of well at the bottom of the mold from 7.00" to 6.0" long
6) change material type to A36 LOW CARBON STEEL
So is ENG0168, but is in 2D format as a DXF/DWG.
Using ENG0168 as a guide, rename FIX0473 as ENG0168 rev 1, change:
1) remove one of three U-slots on the bottom and the accomanying bolt, nut, and washers
2) reduce internal length (cavity size) from 20.00" to 10.00"
3) reduce internal thickness from 2x 1.250" to 2x 1.00"
4) reduce wall thickness (large walls) from 3.25" to 1.625"
5) reduce length of well at the bottom of the mold from 7.00" to 6.0" long
6) change material type to A36 LOW CARBON STEEL