Assembly of 50 Stereo Speaker Cables

I need 50 stereo speaker cables assembled with a small soldering job on each.

Each cable needs a plug soldered onto a pre-stripped 4-conductor cable end. The wiring is:

- Red wire → front gold post
- White wire → rear gold post
- Green + black wires twisted together → flat metal strain-relief strip

All solder points are metal. I’ll provide a clear wiring illustration/photo guide showing exactly where each wire goes.

I will specify the exact parts to be purchased, including the cables, plugs, plug housings and heat-shrink. You’ll need to purchase/source these parts and ship the completed cables to the UK once finished.

You’ll need to provide the soldering iron, solder, flux, wick and any other tools required. For someone with soldering experience, this should be around 5–10 minutes per cable, so likely around half a day’s work in total.

Looking for someone who:

- Has done plug-end soldering before — jack plugs, XLRs or similar
- Can produce neat, reliable solder joints
- Can follow the wiring layout exactly
- Can source/purchase the specified parts
- Can complete the batch and ship the finished cables to the UK