BRX PLC Programming Assistance
Budget: $25 – $50 USD
I need help creating a solid, production-ready program for a BRX PLC, model BX-DM1E-36ER3-D, that will interface with an SV2A-2040 drive. This is strictly a software-side assignment—no hardware wiring or panel design—so the focus is on writing and validating the PLC logic.
Scope
• Build the main ladder (or structured text, if you recommend it) in Do-more Designer so the PLC can read / write all required I/O, execute the drive commands, and manage basic fault handling.
• Provide a clearly commented program file plus a short PDF or Markdown note explaining the tag list, state flow, and any parameters I may need to tweak on site.
• Be available for one remote test session to step through the logic live with me; I can share the PLC over VPN if necessary.
Acceptance
• The .DMD project loads without errors or warnings.
• All mapped signals toggle correctly in simulation.
• Fault and reset routines behave exactly as documented.
If you have hands-on experience with Do-more Designer and BRX hardware, I’d like to get started right away.
Scope
• Build the main ladder (or structured text, if you recommend it) in Do-more Designer so the PLC can read / write all required I/O, execute the drive commands, and manage basic fault handling.
• Provide a clearly commented program file plus a short PDF or Markdown note explaining the tag list, state flow, and any parameters I may need to tweak on site.
• Be available for one remote test session to step through the logic live with me; I can share the PLC over VPN if necessary.
Acceptance
• The .DMD project loads without errors or warnings.
• All mapped signals toggle correctly in simulation.
• Fault and reset routines behave exactly as documented.
If you have hands-on experience with Do-more Designer and BRX hardware, I’d like to get started right away.