ANSYS CFX CFD Simulation Expert
Budget: £10 – £40 GBP
I need a skilled ANSYS CFX user to advise on steady-state CFD simulations on a 3D model.
Ideal Skills and Experience:
- Proficiency in ANSYS CFX
- Strong background in CFD simulations
- Experience with 3D modeling
- Attention to detail and accuracy
Problem is to help with this error message:
"2 isolated fluid regions were found in domain
If the isolated regions do not have the pressure level set either
by the boundary conditions or using a reference pressure equation,
you may encounter severe robustness problems.
This situation may have arisen because a domain interface was not
properly defined during problem setup. Please carefully check
the setup.
The solver will stop now and write a results file. The isolated
regions can be visualised in CFX Post by making plots of the
variable "Isolated Volumes".
If you are sure that the pressure level is set in each isolated
fluid region then you can force the solver to turn off this check
by setting the expert parameter "check isolated regions = f"."
Ideal Skills and Experience:
- Proficiency in ANSYS CFX
- Strong background in CFD simulations
- Experience with 3D modeling
- Attention to detail and accuracy
Problem is to help with this error message:
"2 isolated fluid regions were found in domain
If the isolated regions do not have the pressure level set either
by the boundary conditions or using a reference pressure equation,
you may encounter severe robustness problems.
This situation may have arisen because a domain interface was not
properly defined during problem setup. Please carefully check
the setup.
The solver will stop now and write a results file. The isolated
regions can be visualised in CFX Post by making plots of the
variable "Isolated Volumes".
If you are sure that the pressure level is set in each isolated
fluid region then you can force the solver to turn off this check
by setting the expert parameter "check isolated regions = f"."