Download 3 Genesys Logic Tools software
Budget: $10 – $30 USD
Task is simple download 3 software from the internet
Your task is to locate, download, and verify the functionality of the following configuration and programming tools for Genesys Logic USB Hub Controllers, specifically GL3523 and GL3231S:
Required Software Tools:
Genesys USB 3.2 Hub FW ISP Tool User Guide (GL3523)
Includes firmware update or ISP (In-System Programming) utility for GL3523.
It will be honored if the firmware is found.
Full functional software and its user manual.
Genesys Logic Multi-Tool (GL3231S)
A utility for configuration or status/debug monitoring of the GL3231S controller.
MP Tool ISP (In-System Programming via USB Interface) – GL3231S
Official software used for programming/configuring the GL3231S controller via USB.
You can probably find some of the software in the links I provided, but due to technical reasons in my country, I am not able to access them.
Platform Requirements:
The software must be compatible with:
Windows 11 (64-bit)
Linux
Important Conditions:
Each tool must be fully installable and functional (i.e., it must run and not produce errors on launch).
If login or access restrictions apply, please note if the software is easier to obtain using an Asian-region login (e.g., WeChat) or any China-based account.
If there are firmware .bin, .ini, or .cfg files available with the software, please include them too.
Deliverables:
A folder with all three software packages, preferably in ZIP format.
Any credentials or region-specific tricks necessary to access or use the software (e.g., WeChat login, VPN location).
Installation instructions for both platforms (if applicable).
Your task is to locate, download, and verify the functionality of the following configuration and programming tools for Genesys Logic USB Hub Controllers, specifically GL3523 and GL3231S:
Required Software Tools:
Genesys USB 3.2 Hub FW ISP Tool User Guide (GL3523)
Includes firmware update or ISP (In-System Programming) utility for GL3523.
It will be honored if the firmware is found.
Full functional software and its user manual.
Genesys Logic Multi-Tool (GL3231S)
A utility for configuration or status/debug monitoring of the GL3231S controller.
MP Tool ISP (In-System Programming via USB Interface) – GL3231S
Official software used for programming/configuring the GL3231S controller via USB.
You can probably find some of the software in the links I provided, but due to technical reasons in my country, I am not able to access them.
Platform Requirements:
The software must be compatible with:
Windows 11 (64-bit)
Linux
Important Conditions:
Each tool must be fully installable and functional (i.e., it must run and not produce errors on launch).
If login or access restrictions apply, please note if the software is easier to obtain using an Asian-region login (e.g., WeChat) or any China-based account.
If there are firmware .bin, .ini, or .cfg files available with the software, please include them too.
Deliverables:
A folder with all three software packages, preferably in ZIP format.
Any credentials or region-specific tricks necessary to access or use the software (e.g., WeChat login, VPN location).
Installation instructions for both platforms (if applicable).