Academic report for Introduction to Maritime Science about offshore wind turbines types.
Budget: $30 – $250 AUD
Describe the characteristics, applications and limitations of chosen offshore wind turbine.
Support your answer using some illustrations.
2. Identify the common causes of structural failures for fixed offshore wind turbines.
3. What are the remedial solutions to prevent the failures of such offshore structures, as
discussed in Q-2?
4. How such offshore structures are sustained in terms of principles and techniques?
5. What technologies are employed for the sustainment of offshore structures?
1. This is an individual assignment.
2. You need to submit a high-quality technical report covering all the questions which will be
marked in accordance with the attached rubric.
3. The report must be compiled in accordance with the standard format of ECU’s School of
Engineering format for engineering assignment reports, but you have the flexibility of
incorporating other sections to address the questions.
4. The sketches should not be cut and pasted from any source. These should be drawn either in
any appropriate engineering software or by hand.
5. The report should not exceed 16 pages including the referencing. The attachments, if any, are
excluded.
6. Please note that the following criteria as mentioned in the rubric is mandatory to pass:
a. Technical report writing
Support your answer using some illustrations.
2. Identify the common causes of structural failures for fixed offshore wind turbines.
3. What are the remedial solutions to prevent the failures of such offshore structures, as
discussed in Q-2?
4. How such offshore structures are sustained in terms of principles and techniques?
5. What technologies are employed for the sustainment of offshore structures?
1. This is an individual assignment.
2. You need to submit a high-quality technical report covering all the questions which will be
marked in accordance with the attached rubric.
3. The report must be compiled in accordance with the standard format of ECU’s School of
Engineering format for engineering assignment reports, but you have the flexibility of
incorporating other sections to address the questions.
4. The sketches should not be cut and pasted from any source. These should be drawn either in
any appropriate engineering software or by hand.
5. The report should not exceed 16 pages including the referencing. The attachments, if any, are
excluded.
6. Please note that the following criteria as mentioned in the rubric is mandatory to pass:
a. Technical report writing