Interior and 3D design / external and internal for (wooden existing outdoor canopy pergola )
Budget: $30 – $250 USD
Required to Design Aluminum Frame with Glass for the wooden Canopy pergola (Octagon Shape , 8 Sides)
We need the Design to be as follows:
A-
1. the glass is to be full from floor to top ( the distance between 2 columns is 2500mm, and the height is 2400 mm to the top of the pergola )
2. the glass color should be as per the designer, and the Aluminum Frame also (Preferred as per wooden color).
3. The roof of the pergola will be covered by design from the inside only (The rooftop will be the Same Color).
4. We will make waterproof material between the top of the pergola /inside and the New FalCeiling Design.
5. Make suitable furniture inside the Canopy Pergola (sofas,or Dining Table )
6. Area of the canopy as per the attached Drawing and Photos
B- To Design and Add a small Toilet with the same Canopy Cladding attached to the Canopy as per the Drawing
C - Make a Small Store of 20 to 25 Square meters on the Back Side of the canopy with Small Toilet (with cladding or External Paint as per Design)
D- make Autocad Drawing to support your IDEA And Design
Regards,
Samer
We need the Design to be as follows:
A-
1. the glass is to be full from floor to top ( the distance between 2 columns is 2500mm, and the height is 2400 mm to the top of the pergola )
2. the glass color should be as per the designer, and the Aluminum Frame also (Preferred as per wooden color).
3. The roof of the pergola will be covered by design from the inside only (The rooftop will be the Same Color).
4. We will make waterproof material between the top of the pergola /inside and the New FalCeiling Design.
5. Make suitable furniture inside the Canopy Pergola (sofas,or Dining Table )
6. Area of the canopy as per the attached Drawing and Photos
B- To Design and Add a small Toilet with the same Canopy Cladding attached to the Canopy as per the Drawing
C - Make a Small Store of 20 to 25 Square meters on the Back Side of the canopy with Small Toilet (with cladding or External Paint as per Design)
D- make Autocad Drawing to support your IDEA And Design
Regards,
Samer