Waveshare 3.5″ Display Integration
Budget: ₹600 – ₹1,500 INR
I need my Waveshare 3.5-inch screen working flawlessly on a Raspberry Pi 5 running the standard Raspberry Pi OS. The goal is simple: plug the display in, power up, and immediately have a responsive touch interface I can use for on-device controls.
Please handle every step—kernel modules, device tree tweaks, driver installation, and touch-panel calibration—so that the display shows the primary desktop with full touch support (taps, long-press, drag). I’d like rotational settings and back-light adjustment documented as well, because the unit will be mounted vertically in an enclosure.
> I already did connection of raspberry pi and display, but not getting op. so i want to find the reason and want solution of it
Deliverables:
• A repeatable setup script or set of commands with clear comments
• Any configuration files you modify or create (/boot/config.txt, xinput calibration, etc.)
• A short read-me describing how to re-flash or update the system without breaking the display
Once the above is in place I’ll test basic interface control tasks—opening apps, dragging windows, and a quick Python GUI—to confirm everything responds accurately.
Please handle every step—kernel modules, device tree tweaks, driver installation, and touch-panel calibration—so that the display shows the primary desktop with full touch support (taps, long-press, drag). I’d like rotational settings and back-light adjustment documented as well, because the unit will be mounted vertically in an enclosure.
> I already did connection of raspberry pi and display, but not getting op. so i want to find the reason and want solution of it
Deliverables:
• A repeatable setup script or set of commands with clear comments
• Any configuration files you modify or create (/boot/config.txt, xinput calibration, etc.)
• A short read-me describing how to re-flash or update the system without breaking the display
Once the above is in place I’ll test basic interface control tasks—opening apps, dragging windows, and a quick Python GUI—to confirm everything responds accurately.