Raspberry Pico SSI data handling
Budget: €12 – €18 EUR
I’m integrating an SSI absolute encoder with a Raspberry Pi Pico. Your role is to set up reliable communication from the pico to the SSI encoder. Later a communication to another device needs to be set up to transfer te position data.
- I'd like to use visual studio code and micropython
- The SSI encoder is connected to an ISL3177EIBZ transceiver to convert the pico signal to an SSI clock signal an convert data back to the pico
- The SSI clock and data readback is a time-based signal, therefore a RP2040 is used.
- The SSI absolute encoder uses a 17-bits communication which has to be read out every 1ms
- I'd like to use visual studio code and micropython
- The SSI encoder is connected to an ISL3177EIBZ transceiver to convert the pico signal to an SSI clock signal an convert data back to the pico
- The SSI clock and data readback is a time-based signal, therefore a RP2040 is used.
- The SSI absolute encoder uses a 17-bits communication which has to be read out every 1ms