Firmware Raspberry Pi 4 Or 5 and bladeRF 2.0
Budget: €12 – €18 EUR
We are looking for a company with experience in raspberry Pi programming and at the same time
SDR passive detection modules:
- WIFI sensor systems
For WIFI your able to use dongle with the RTL-8192CU Chipset or the Alpha Network AWUS036ACS AC600
We would recommend to use 4 antennas for each WIFI sensor system to get faster and reliable detections with the Alpha AWUS036ACS
- Bluetooth sensor systems
For Bluetooth your able to use dongle of ZEMTE, each model of them works. We would recommend the model BT5.0+ with the RTL8761B chipset.
We would advise to use 4 antennas for each Bluetooth sensor system to get faster and reliable detections with the Bluetooth 5.0+.
- Passive GSM & VSS sensor systems
For the passive GSM and VSS sensor system your able to use the Nooelec NESDR Nano 3 and the Nooelec NESDR SMArTee v2 SDR.
We would advise to use the Nooelec NESDR SMArTee v2.
- Cellular and LTE sensor systems
For the Cellular and LTE sensor system you should use the bladeRF 2.0 micro xA9.
If the client has a specific SDR model or brand that they want to use we can always integrate this for them, of course this will require a small development fee based on the hours we need to put into it.
Se ale looking for firmware based passive detection of Bluetooth, WiFi, gsm and tpms
SDR passive detection modules:
- WIFI sensor systems
For WIFI your able to use dongle with the RTL-8192CU Chipset or the Alpha Network AWUS036ACS AC600
We would recommend to use 4 antennas for each WIFI sensor system to get faster and reliable detections with the Alpha AWUS036ACS
- Bluetooth sensor systems
For Bluetooth your able to use dongle of ZEMTE, each model of them works. We would recommend the model BT5.0+ with the RTL8761B chipset.
We would advise to use 4 antennas for each Bluetooth sensor system to get faster and reliable detections with the Bluetooth 5.0+.
- Passive GSM & VSS sensor systems
For the passive GSM and VSS sensor system your able to use the Nooelec NESDR Nano 3 and the Nooelec NESDR SMArTee v2 SDR.
We would advise to use the Nooelec NESDR SMArTee v2.
- Cellular and LTE sensor systems
For the Cellular and LTE sensor system you should use the bladeRF 2.0 micro xA9.
If the client has a specific SDR model or brand that they want to use we can always integrate this for them, of course this will require a small development fee based on the hours we need to put into it.
Se ale looking for firmware based passive detection of Bluetooth, WiFi, gsm and tpms