Basement Excavation Fabrication Drawings Production -- 2
Budget: $30 – $250 AUD
I have a temporary works design for a basement excavation project in the UK that I need an experienced structural engineer to review, verify and produce fabrication drawings for.
The design is already fully developed with all calculations completed — this is a review and confirmation exercise, not a design from scratch.
What I need from you:
1. Review and verification of my calculation document
2. Production of fabrication drawings to construction issue standard for the steelwork fabricator
3. Documents returned under your name as the designer
4. A copy of your engineering qualifications and professional memberships for our project records
The works in brief:
— Basement excavation 17.5m x 13.1m, 6.0m deep
— KD6/6 trench sheet piling — two-tier deep side, single sheet shallow side
— 168.3x6.3 CHS props at -1.5m and -3.0m
— 203x203x46 UC king post columns, 152x152x23 UC and 152x89x16 UB walers
— 7 bays x 2.5m, full connection details included
The design is already fully developed with all calculations completed — this is a review and confirmation exercise, not a design from scratch.
What I need from you:
1. Review and verification of my calculation document
2. Production of fabrication drawings to construction issue standard for the steelwork fabricator
3. Documents returned under your name as the designer
4. A copy of your engineering qualifications and professional memberships for our project records
The works in brief:
— Basement excavation 17.5m x 13.1m, 6.0m deep
— KD6/6 trench sheet piling — two-tier deep side, single sheet shallow side
— 168.3x6.3 CHS props at -1.5m and -3.0m
— 203x203x46 UC king post columns, 152x152x23 UC and 152x89x16 UB walers
— 7 bays x 2.5m, full connection details included