fix and Document the changes to Fix in the code on Nextion-HMI and ESP32-code
Budget: $30 – $250 USD
fix-Document-the-Fix-Nextion-HMI-and-ESP32-code.docx
Project Name:
fix-Document-the-Fix-Nextion-HMI-and-ESP32-code.docx
Project description:
1. The project is consisting of Nextion NX8048P070_011 the Nextion touch screen.
2. Tested uploading at 9600 ok.
3. Tested to respond to set page 0, page 1, …
4. Tested to print lines Ok.
5. The ESP32 sketch is resending and run.
6. The ESP32 is running good communications to Nextion touch screen.
7. The Project is ready and claimed to be working at freelancer place.
8. The HMI is responding.
9. The project have 4 screens ( page 0, 1, 2,3) and
10. screens keybrdC
11. screens keybrdA
12. screens keybrdB.
13. There are Variable send to SCR from ESP32 and The Variable read from HMI ob ESP32 for calibration.
14. Calibration stored in EEPROM
What required.
1. Fix the HMI code or ESP32 or both codes.
2. Detail document the fix steps in the code comments.
3. Delivery the fixed code for test on my hardware setup.
4. The fixes must be detail documented to be repeated on my original code and make the SCR and ESP work with demo data.
5. A Write and read data to SD on Nextion option to be added, screens to be added.
Milestones.
1. Fix the HMI code or ESP32 or both codes.
2. Detail document the fix steps. In the code comments
3. Delivery the fixed code for test on my hardware setup.
4. A Write and read data to SD on Nextion option to be added, screens to be added
Project Name:
fix-Document-the-Fix-Nextion-HMI-and-ESP32-code.docx
Project description:
1. The project is consisting of Nextion NX8048P070_011 the Nextion touch screen.
2. Tested uploading at 9600 ok.
3. Tested to respond to set page 0, page 1, …
4. Tested to print lines Ok.
5. The ESP32 sketch is resending and run.
6. The ESP32 is running good communications to Nextion touch screen.
7. The Project is ready and claimed to be working at freelancer place.
8. The HMI is responding.
9. The project have 4 screens ( page 0, 1, 2,3) and
10. screens keybrdC
11. screens keybrdA
12. screens keybrdB.
13. There are Variable send to SCR from ESP32 and The Variable read from HMI ob ESP32 for calibration.
14. Calibration stored in EEPROM
What required.
1. Fix the HMI code or ESP32 or both codes.
2. Detail document the fix steps in the code comments.
3. Delivery the fixed code for test on my hardware setup.
4. The fixes must be detail documented to be repeated on my original code and make the SCR and ESP work with demo data.
5. A Write and read data to SD on Nextion option to be added, screens to be added.
Milestones.
1. Fix the HMI code or ESP32 or both codes.
2. Detail document the fix steps. In the code comments
3. Delivery the fixed code for test on my hardware setup.
4. A Write and read data to SD on Nextion option to be added, screens to be added