RFID/NFC Gateway Design & Manufacture
Budget: $10 – $5,000 USD
The Highlights.
1. Task: The Design and Manufacture of RFID or NFC Gate.
2. Gate Dimensions: 940mm Tall x 10mm Wide x Smallest Unit Thickness
3. Tag Type To Be Employed: Passive RFID
4. Power / Data Connection: USB-C
5. Power Consumption: Unknown - To Be Advised by Designer
Description:
The RFID/NFC Gate required is as per dimensions and requirements laid down (PDF document will be provided on request).
Requirement is for an inventory management solution to track items via Passive RFID tags scanned once they pass through this Gate.
We will require the manufacturer to advise us if RFID or NFC is the best communication protocol for the solution.
The Dimensions are critical for the project success in implementation, I don’t know if there will be physical or technical limitations to the size we requested so we will need an input to this also.
If the units need a connection between each other which is not sketched in the illustration this is fine to do, they can connect to communicate to one another via the base or the top.
The Power Input and Data output is to be via a USB-C connector - Once again there are RFID/NFC card readers available that connect directly into an iPhone so I will assume this is possible, I just need to know on this larger unit if it is at all possible or does its size exceed USB-C power transmission. This isn’t a show stopper. External power input is possible.
Passive RFID tags have 512kb storage in them, at post the tag will only have a 12 digit number that the iOS platform will receive and identify in its database.
I would like to commission an individual/company to provide a complete design and manufacture of this antenna receiver gate - I would be looking to acquire 4 Units as Proof-of-Concept for the project. In the next stage we develop related software.
1. Task: The Design and Manufacture of RFID or NFC Gate.
2. Gate Dimensions: 940mm Tall x 10mm Wide x Smallest Unit Thickness
3. Tag Type To Be Employed: Passive RFID
4. Power / Data Connection: USB-C
5. Power Consumption: Unknown - To Be Advised by Designer
Description:
The RFID/NFC Gate required is as per dimensions and requirements laid down (PDF document will be provided on request).
Requirement is for an inventory management solution to track items via Passive RFID tags scanned once they pass through this Gate.
We will require the manufacturer to advise us if RFID or NFC is the best communication protocol for the solution.
The Dimensions are critical for the project success in implementation, I don’t know if there will be physical or technical limitations to the size we requested so we will need an input to this also.
If the units need a connection between each other which is not sketched in the illustration this is fine to do, they can connect to communicate to one another via the base or the top.
The Power Input and Data output is to be via a USB-C connector - Once again there are RFID/NFC card readers available that connect directly into an iPhone so I will assume this is possible, I just need to know on this larger unit if it is at all possible or does its size exceed USB-C power transmission. This isn’t a show stopper. External power input is possible.
Passive RFID tags have 512kb storage in them, at post the tag will only have a 12 digit number that the iOS platform will receive and identify in its database.
I would like to commission an individual/company to provide a complete design and manufacture of this antenna receiver gate - I would be looking to acquire 4 Units as Proof-of-Concept for the project. In the next stage we develop related software.