Siemens S7-1500 Panel Wiring
Budget: ₹37,500 – ₹75,000 INR
I need an experienced controls technician to complete all on-site field wiring for a Siemens S7-1500 PLC panel that will operate in an indoor environment. The cabinet is already mounted and the devices are in place; what remains is terminating the incoming power feeds, I/O, network cabling, and field instruments, then powering up and testing.
Scope
• Dress, cut, and terminate all wires inside the panel, keeping routing clean and fully labelled to Siemens standards.
• Land field cables on terminal blocks and the S7-1500 modules, following the provided wiring schedule.
• Perform continuity and insulation checks, power-up verification, and I/O point-to-point testing with me present.
• Update the as-built schematic with any field changes before handover.
You will need your own hand tools, test gear (multimeter, insulation tester), and ferrule crimper; I will supply consumables and the latest drawings. Once everything passes the final loop test and the as-built drawing is signed off, the job is complete.
Scope
• Dress, cut, and terminate all wires inside the panel, keeping routing clean and fully labelled to Siemens standards.
• Land field cables on terminal blocks and the S7-1500 modules, following the provided wiring schedule.
• Perform continuity and insulation checks, power-up verification, and I/O point-to-point testing with me present.
• Update the as-built schematic with any field changes before handover.
You will need your own hand tools, test gear (multimeter, insulation tester), and ferrule crimper; I will supply consumables and the latest drawings. Once everything passes the final loop test and the as-built drawing is signed off, the job is complete.