Click PLC HMI Development Houston
Budget: $10 – $30 USD
I need a complete PLC + HMI package built around an Automation Direct CLICK Plus CPU to run a small pilot test unit used for process control. You will receive the P&ID for the skid so you can map every I/O point and design the tag structure accurately.
Your scope covers three parts:
• PLC program written in the CLICK programming environment, fully commented and ready to load.
• HMI graphics and logic (C-more or other Automation Direct-compatible platform) that give operators clear access to temperature, flow and pressure data as well as basic start/stop and alarm handling.
• A shopping list of all hardware we must order—CPU, PS, any expansion I/O, comms modules, touch panel size, enclosure accessories, everything needed to power up on site.
Once hardware is in place you will spend one to two days in Houston for final commissioning: download, loop checks, minor tweaks, and a short hand-off session with our operators.
Deliverables are accepted when the program compiles without errors, the HMI navigates smoothly, and the live system hits all setpoints on the pilot unit per the P&ID.
Your scope covers three parts:
• PLC program written in the CLICK programming environment, fully commented and ready to load.
• HMI graphics and logic (C-more or other Automation Direct-compatible platform) that give operators clear access to temperature, flow and pressure data as well as basic start/stop and alarm handling.
• A shopping list of all hardware we must order—CPU, PS, any expansion I/O, comms modules, touch panel size, enclosure accessories, everything needed to power up on site.
Once hardware is in place you will spend one to two days in Houston for final commissioning: download, loop checks, minor tweaks, and a short hand-off session with our operators.
Deliverables are accepted when the program compiles without errors, the HMI navigates smoothly, and the live system hits all setpoints on the pilot unit per the P&ID.