TSX Momentum Schniedr PLC unlock
Budget: $25 – $50 USD
We have a few TSX Momentum PLC model 171CCC98030. Each has MBTCP & MB+ ports. ALL I/O is on MB+ units.
It has the PLC program developed by a vendor who is not available. It has a password that is unknown to us.
We do not know if the PLC was programmed using Proworx32, Concept or Unity-pro or something else & what version of editor used.
. The system was put in service about 8 years ago. We need to make some PLC program changes. Need help in retrieving the current program(s) in an editable form.
The PLC logic comments will be figured out later. We are open to upgrading the CPUs to a current model.
There are several HMIs in use, connected to the MBTCP network.
The HMI are model Advantech WinCE. We do not have HMI configuration files either. If you can help retrieve HMI config files also, that will also be a plus.
Remote access to PLC system can be provided via a laptop connected to the network.
It has the PLC program developed by a vendor who is not available. It has a password that is unknown to us.
We do not know if the PLC was programmed using Proworx32, Concept or Unity-pro or something else & what version of editor used.
. The system was put in service about 8 years ago. We need to make some PLC program changes. Need help in retrieving the current program(s) in an editable form.
The PLC logic comments will be figured out later. We are open to upgrading the CPUs to a current model.
There are several HMIs in use, connected to the MBTCP network.
The HMI are model Advantech WinCE. We do not have HMI configuration files either. If you can help retrieve HMI config files also, that will also be a plus.
Remote access to PLC system can be provided via a laptop connected to the network.