Wake up a computer via its public address via Teamviewer

Set-up remote switch on with Teamviewer when the pc is off and outside network using its public address

**Wake-on-LAN via a public address***
If you want to wake up the computer with the help of its public address, your computer must be clearly identifiable on the Internet at all times.
This is the case either if you have a fixed, static IP address through your Internet provider or your computer is reachable, e.g. with the help of a dynamic DNS provider (see http://en.wiki-pedia.org/wiki/Dynamic_DNS). If these conditions are met, you can activate Wake-on-LAN via a public address in the TeamViewer options.
To activate TeamViewer Wake-on-LAN via a public address, follow these steps:
1.Start TeamViewer on the computer.
2.In the main menu, click Extras | Options.
The TeamViewer settings dialog box will open.
3.Select the category General.
4.Under Network settings | Wake-on-LAN, click the Configure… button.
The Wake-on-LAN dialog will open.
5.Click the Public address option button.
6.In the Address field, enter the fixed IP address or DNS name of the computer.
7.In the Port field, enter the UDP port via which the computer can be reached (see Section 7.1 , page 15).
8.Click the OK button.
9.The computer can now be wakened via its public address and TeamViewer.