Build an Android Print App for the Bixolon SPP-R200III -- 2
Budget: $750 – $1,500 USD
Develop an APP for Android Phones using the Software_Android_UPOS_SDK_V2.1.6_EN from Bixolon for the SPP-R200III. https://www.bixolon.com/download_view.php?idx=12&s_key=
Printer needs to connect via bluetooth and work in Label or Receipt mode so long as the feed starts and stops as per the black mark sensor on the printer on pre-printed tickets.
The tickets are 58mm wide by 210mm long excluding the black mark which is a further 5mm.
The black mark is at the bottom front side of the tickets (Perforation is after the black mark)
The app should support adjusting the width and the length of the ticket.
Example of the generated ticket is attached.
This app is basically a printer driver for this printer residing on an Android Device.
I would like the UI for the App to select Receipt Mode or Label Mode, Define Extra Feed, Define Paper Media Size
Further details will be provided to enquiries.
Printer needs to connect via bluetooth and work in Label or Receipt mode so long as the feed starts and stops as per the black mark sensor on the printer on pre-printed tickets.
The tickets are 58mm wide by 210mm long excluding the black mark which is a further 5mm.
The black mark is at the bottom front side of the tickets (Perforation is after the black mark)
The app should support adjusting the width and the length of the ticket.
Example of the generated ticket is attached.
This app is basically a printer driver for this printer residing on an Android Device.
I would like the UI for the App to select Receipt Mode or Label Mode, Define Extra Feed, Define Paper Media Size
Further details will be provided to enquiries.