Arduino: move stepper with handwheel and show movement on 16x2 screen -- 2
Budget: €30 – €250 EUR
I need a super simple Arduino project programmed + connection diagram
Procedure.:
1. Handwheel turns stepper motor (for lineair movement X axis up and down.
2. Button to push to set position to 0
3. Arduino 16x2 screen connected to show the movement of axis. Upon pressing button it resets to 0 on screen.
Result:. Stepper motors makes revolutions up or down based on turning the handwheel and the amount of movement is shown on the 16x2 screen.
Most of this code is already available on forum and internet. https://forum.arduino.cc/t/arduino-mpg-standalone-jog/876041. adaptation of this and adding the screen.
Hereunder small diagram but this is set for angular, mine would need to be metric
Handwheel
https://a.aliexpress.com/_mPSwlDQ
Stepdriver TB6600
https://a.aliexpress.com/_msnzcBe
Procedure.:
1. Handwheel turns stepper motor (for lineair movement X axis up and down.
2. Button to push to set position to 0
3. Arduino 16x2 screen connected to show the movement of axis. Upon pressing button it resets to 0 on screen.
Result:. Stepper motors makes revolutions up or down based on turning the handwheel and the amount of movement is shown on the 16x2 screen.
Most of this code is already available on forum and internet. https://forum.arduino.cc/t/arduino-mpg-standalone-jog/876041. adaptation of this and adding the screen.
Hereunder small diagram but this is set for angular, mine would need to be metric
Handwheel
https://a.aliexpress.com/_mPSwlDQ
Stepdriver TB6600
https://a.aliexpress.com/_msnzcBe