SSD1963 PCB
Budget: $250 – $750 USD
PCB design and schematic resulting in gerbers, drill etc. for fabrication PCB by JLCPCB.
Primary components are PIC32MX795F512H-80I_MR and SSD1963QL9 LQFP-128 LCD driver chip. Also includes a MCP602 and related components. Power to be supplied from a 9 volt plug in power supply with all components required to convert 9 volts to 3.3 volts for chips.
A 40 pin smt connector must be located to accept the flat cable from the LCD.
All components shall be on one side of the PCB. Middle layers shall be power and ground.
I will supply a schematic on pdf and parts list on excel. You will need to re-enter the schematic and then design the PCB.
Primary components are PIC32MX795F512H-80I_MR and SSD1963QL9 LQFP-128 LCD driver chip. Also includes a MCP602 and related components. Power to be supplied from a 9 volt plug in power supply with all components required to convert 9 volts to 3.3 volts for chips.
A 40 pin smt connector must be located to accept the flat cable from the LCD.
All components shall be on one side of the PCB. Middle layers shall be power and ground.
I will supply a schematic on pdf and parts list on excel. You will need to re-enter the schematic and then design the PCB.