PCB with HX711 and ESP32

Hi,

We have already created a prototype with an ESP32 WROOM from AZ-Delivery + HX711 Loadcell + LCD + 2 Input Buttons with proven Sourcode for ESP32 and the corespondening PWA-BLE Application.

Now I want to create PCB layout to build 10 Prototypes.

We just want have everything integratet on a small PCB (without Pinheader from Prototyping Boards) with predefined maximum dimensions:

1 x Micro USB-B Socket for Powering and Programming (wich should overlap the PCB to integrate into housing)

2 x LED-Outs (accessible via GPIO)

1 x Screw-Terminals (for each HX711, with E+, E-, A+ A- )

4 x Mounting holes

1x I2C Pinout

1x 3.3V / GND Pinout

1x 5V Pinout for HX711

1x 2x16 LCD Display

Optional

- Connector for LiPo (charging trough Micro USB-B Socket)
- I2C Display
- Microswitch for Programming (beside the USB-B Socket, accesibel trough pin-hole)

The PCB should not exted the dimesion 5x10cm.

I need complete files for PCB etching and assembly (BOM, Gerber, Schematics)

EasyEDA would be great if possible. However couldbe in Eagle or any other Software.

Thank you for your Bids

Daniel