PCB schematic and PCB layout
Budget: $30 – $250 USD
I am looking for a freelancer who can help me with a PCB schematic and layout. The PCB design is simple. (23 Components on the bill of materials)
I have attached a picture of the schematic and a bill of materials.
The PCB must preferably be 60mm high and 72mm wide with 4*m3 mounting holes. (The size can be increased if required)
Please note the following:
The tracks marked in blue on the schematic must be at least 5mm thick. These tracks must also be at least 5mm away from any other tracks or connections due to high voltage. The tracks marked in red also need to be at least 5mm away from any other tracks or connections due to high voltage. (But the red tracks will not carry high currents)
All the connectors and relays need to be on the top side of the board. The components may be on the top and/or bottom side of the board.
I have attached a picture of the schematic and a bill of materials.
The PCB must preferably be 60mm high and 72mm wide with 4*m3 mounting holes. (The size can be increased if required)
Please note the following:
The tracks marked in blue on the schematic must be at least 5mm thick. These tracks must also be at least 5mm away from any other tracks or connections due to high voltage. The tracks marked in red also need to be at least 5mm away from any other tracks or connections due to high voltage. (But the red tracks will not carry high currents)
All the connectors and relays need to be on the top side of the board. The components may be on the top and/or bottom side of the board.