PCB Design
Budget: $30 – $250 AUD
I work for a small technology business in Australia. We are looking to have a simple PCB designed. The PCB has only 4 components.
Attached is a schematic, bill of materials, and sketch of layout required.
Requirements:
* The PCB will only be single layer with top and bottom traces.
* The traces must be able to support 1.5amp of current at up to 60VDC
* Components must be laid out on the PCB as per the sketch
* Routing between RJ45 jacks socket 1 and 2, pins 1/2 and 4/5 must be length matched as per requirements for ethernet
I require that the finished output be ready for uploading to a PCB manufacturing company such as JLPCB for manufacturing. I also need copies of the design files to suit EAGLE or KICAD for future use.
Attached is a schematic, bill of materials, and sketch of layout required.
Requirements:
* The PCB will only be single layer with top and bottom traces.
* The traces must be able to support 1.5amp of current at up to 60VDC
* Components must be laid out on the PCB as per the sketch
* Routing between RJ45 jacks socket 1 and 2, pins 1/2 and 4/5 must be length matched as per requirements for ethernet
I require that the finished output be ready for uploading to a PCB manufacturing company such as JLPCB for manufacturing. I also need copies of the design files to suit EAGLE or KICAD for future use.