Layout PCB Schematics. Pi CM4 + STM32F405
Budget: £250 – £750 GBP
I have a nearly complete schematic that just needs a little tweak and a professional look over. I have also placed connectors where I would like them and just need you to route all the traces and connect everything.
For reference the board is to be manufactured through JLCPCB so if you use EASYEDA its a bonus.
The board is designed to be the same size as the compute module at 55x40mm and 4 layer. It has 2 camera connectors, a USB hub, multiple SMD Headers. It also has a STM32F405 on board with various sensors.
There is a potential part 2 to the project, which would involve laying out another PCB from an existing schematic.
I have attached an image of a prototype board I have had made, it just needs condensing down to the above dimensions.
For reference the board is to be manufactured through JLCPCB so if you use EASYEDA its a bonus.
The board is designed to be the same size as the compute module at 55x40mm and 4 layer. It has 2 camera connectors, a USB hub, multiple SMD Headers. It also has a STM32F405 on board with various sensors.
There is a potential part 2 to the project, which would involve laying out another PCB from an existing schematic.
I have attached an image of a prototype board I have had made, it just needs condensing down to the above dimensions.