Inspection and modification of the existing "ATnoX" PCB
Budget: €8 – €30 EUR
Inspection and modification of the existing "ATnoX" PCB
Link: https://github.com/hkzlab/ATnoX
Requirements:
* Two PCB's on an area of 100 x 100 mm, separated by mouse bites (one e.g. 50 x 100 mm).
* If possible, replace all SMD and SMT components with through hole components, if not possible, replace with as easy as possible to solder components.
* Components should be soldered and installed on one side only
* As an alternative to the 14 pin connector, create the option to solder screw terminals.
* There should also be a hole in each corner for fastening with a screw.
* Delivery as KiCad project files (or comparable open standard)
* Also generate all files necessary for JLCPCB board fabrication and assembly
e.g. with the KiCAD JLCPCB tools > https://github.com/Bouni/kicad-jlcpcb-tools
or KiCad BOM CPL Plugin > https://github.com/prrvchr/KiCad-BOM-CPL-Plugin
Link: https://github.com/hkzlab/ATnoX
Requirements:
* Two PCB's on an area of 100 x 100 mm, separated by mouse bites (one e.g. 50 x 100 mm).
* If possible, replace all SMD and SMT components with through hole components, if not possible, replace with as easy as possible to solder components.
* Components should be soldered and installed on one side only
* As an alternative to the 14 pin connector, create the option to solder screw terminals.
* There should also be a hole in each corner for fastening with a screw.
* Delivery as KiCad project files (or comparable open standard)
* Also generate all files necessary for JLCPCB board fabrication and assembly
e.g. with the KiCAD JLCPCB tools > https://github.com/Bouni/kicad-jlcpcb-tools
or KiCad BOM CPL Plugin > https://github.com/prrvchr/KiCad-BOM-CPL-Plugin