ESP32 PCB design
Budget: $30 – $250 USD
Hi, I am looking for a pcb design with the following specs:
- Should be done in Kicad 6
- All parts should be available and in stock from lcsc (part numbers and footprints properly logged on kicad)
- Manufacturing and output files ready for JLCPCB assembly
- Part selection should be optimized for cost and reliablity
- PCB should be resilient against emi
Parameters
- ESP32 module
- 4x4 channel ADC - ADS1115 with different addresses selected. Broken out to phoenix screw terminals.
The ADC input should have a voltage divider to support the reading of max 13.6v (13.6v 7AH battery)
- Power: support 12vdc input. (13.6v 7AH battery) broken out to phoenix screw terminals.
- I2C bus broken out to phoenix screw terminals.
- 4xio broken out to phoenix screw terminals with applicable optional pull up and pull down resistors.
- TXD, RXD, EN & IO0 broken out to dupont connector for programming mode.
- Should be done in Kicad 6
- All parts should be available and in stock from lcsc (part numbers and footprints properly logged on kicad)
- Manufacturing and output files ready for JLCPCB assembly
- Part selection should be optimized for cost and reliablity
- PCB should be resilient against emi
Parameters
- ESP32 module
- 4x4 channel ADC - ADS1115 with different addresses selected. Broken out to phoenix screw terminals.
The ADC input should have a voltage divider to support the reading of max 13.6v (13.6v 7AH battery)
- Power: support 12vdc input. (13.6v 7AH battery) broken out to phoenix screw terminals.
- I2C bus broken out to phoenix screw terminals.
- 4xio broken out to phoenix screw terminals with applicable optional pull up and pull down resistors.
- TXD, RXD, EN & IO0 broken out to dupont connector for programming mode.