Dual USB-C 3.1 PCB Design
Budget: $30 – $250 USD
I'm looking for someone to create two separate PCBs with USB-C connectors. The first board will consist of a USB-C female to USB-C male connector, while the second will have a USB-C female to USB-C female connector.
Key Requirements:
- Design of two separate PCBs with USB-C connectors
- One PCB should have a USB-C female to USB-C male connector
- The other PCB should have a USB-C female to USB-C female connector
- The male connector needs to be mounted at 90 degrees to the board
- One female connector needs to be mounted at 90 degrees to the board
- Both boards should support data transfer and device charging
- Both boards when oriented should connect to each other with the 90 degree connectors forming a Z shape.
- No additional components or features are required.
Ideal Skills and Experience:
- Proficiency in PCB design and layout
- Experience with USB-C connectors and associated protocols
- Ability to design for both data transfer and charging
- Knowledge of mounting connectors at angles on PCBs
The final deliverables for this project should be the design files for both PCBs, ready for fabrication through pcbway or other suggested mfg. Please include any relevant experience while bidding. Thank you.
Key Requirements:
- Design of two separate PCBs with USB-C connectors
- One PCB should have a USB-C female to USB-C male connector
- The other PCB should have a USB-C female to USB-C female connector
- The male connector needs to be mounted at 90 degrees to the board
- One female connector needs to be mounted at 90 degrees to the board
- Both boards should support data transfer and device charging
- Both boards when oriented should connect to each other with the 90 degree connectors forming a Z shape.
- No additional components or features are required.
Ideal Skills and Experience:
- Proficiency in PCB design and layout
- Experience with USB-C connectors and associated protocols
- Ability to design for both data transfer and charging
- Knowledge of mounting connectors at angles on PCBs
The final deliverables for this project should be the design files for both PCBs, ready for fabrication through pcbway or other suggested mfg. Please include any relevant experience while bidding. Thank you.