Draw in CAD a schematic into a PCB
Budget: €250 – €750 EUR
We kindly need someone for development and routing of a 2 Layer (or even 4layer) PCB starting from Eagle CAD schematic (file.sch) attached.
Maximum size of the PCB should not exceed 200x300mm.
The PCB (called from now MAINBOARD) should host two small square boards (Board A and B) measuring 75mm x 75mm that will be inserted on the top.
Interconnections between the two smaller boards and the mainboard are made via multiple 2 and 3 pin connector (header) with 2.54 inch pitch.
DXF Reference of the given boards (A and B) also showing the correct placement of interconnection is shown in the file .brd attached
No components are allowed to seat underneath the space left for the two boards.
User has to provide:
Fully routed PCB board as file .brd in Eagle CAD environment
DRC and ERC without errors or exceptions.
all ready to be sent to PCB manufacturer.
If Altium user same offer must comprehend importing into Altium environment.
Maximum size of the PCB should not exceed 200x300mm.
The PCB (called from now MAINBOARD) should host two small square boards (Board A and B) measuring 75mm x 75mm that will be inserted on the top.
Interconnections between the two smaller boards and the mainboard are made via multiple 2 and 3 pin connector (header) with 2.54 inch pitch.
DXF Reference of the given boards (A and B) also showing the correct placement of interconnection is shown in the file .brd attached
No components are allowed to seat underneath the space left for the two boards.
User has to provide:
Fully routed PCB board as file .brd in Eagle CAD environment
DRC and ERC without errors or exceptions.
all ready to be sent to PCB manufacturer.
If Altium user same offer must comprehend importing into Altium environment.