Double-Sided PCB Design from Schematic file
Budget: ₹1,500 – ₹12,500 INR
I am seeking a proficient PCB designer to create a double-sided PCB design from a given SCH file. The design must not use any SMD.
Input Header J7 is a 4-pin male header of 2.54mm each and connections PIN1 and PIN3,
Output Header J10 is a 4-pin male header of 2.54mm each and connections PIN1 and PIN4,
The power input header J6 is a 6-pin male header of 2.54mm each and connects on PIN1 - +36V and PIN3 - (-36V), PIN4- (-15V) and PIN6 +15V.
The TIP35C and TIP36C both share the same HEAT SINK of 75mm x 75mm with the fan.
The BC239 and BC240 both are on separate heat sinks of 25mm x 25mm without fans.
The final product should be a fully functioning double-sided PCB design of 115mm x 225 mm and 4 mounting holes at the corners.
Required GERBER files and Material List
Here is the PNG of the Schematic. The SCH file will be delivered later.
Input Header J7 is a 4-pin male header of 2.54mm each and connections PIN1 and PIN3,
Output Header J10 is a 4-pin male header of 2.54mm each and connections PIN1 and PIN4,
The power input header J6 is a 6-pin male header of 2.54mm each and connects on PIN1 - +36V and PIN3 - (-36V), PIN4- (-15V) and PIN6 +15V.
The TIP35C and TIP36C both share the same HEAT SINK of 75mm x 75mm with the fan.
The BC239 and BC240 both are on separate heat sinks of 25mm x 25mm without fans.
The final product should be a fully functioning double-sided PCB design of 115mm x 225 mm and 4 mounting holes at the corners.
Required GERBER files and Material List
Here is the PNG of the Schematic. The SCH file will be delivered later.