Design and develop GPS Tracking and monitoring board with ESP32-WROOM-32UE
Budget: $10 – $30 AUD
The PCB board needs to cover followed:
1. Board supply from 8-36V
2. Three analog inputs to measure volts from 0-36V (ESP32 ADC)
3. Three analog inputs to measure current and volts from 0-20A using INA226 via I2C
4. Two Digital inputs with high voltage protection, working voltage 0-36V
5. Two Digital Outputs Open Drain with N-MOSFET (AO3400)
6. One serial input for GPS module NEO-M8N-0-01 (ESP32 - Serial 2)
7. ESP32 & NEO-M8N-0-01 powered by second power supply Step-Down from 12V to 3.3V
8. Display Module 128X128 I2C 1.5inch SSD1327 128128 LCD Screen
After design approval would need a Circuit, PCB and Gerber files suitable for https://jlcpcb.com or https://www.pcbway.com
Please before you apply for the JOB make sure you understand the requirement and provide an example of your work you have done before.
1. Board supply from 8-36V
2. Three analog inputs to measure volts from 0-36V (ESP32 ADC)
3. Three analog inputs to measure current and volts from 0-20A using INA226 via I2C
4. Two Digital inputs with high voltage protection, working voltage 0-36V
5. Two Digital Outputs Open Drain with N-MOSFET (AO3400)
6. One serial input for GPS module NEO-M8N-0-01 (ESP32 - Serial 2)
7. ESP32 & NEO-M8N-0-01 powered by second power supply Step-Down from 12V to 3.3V
8. Display Module 128X128 I2C 1.5inch SSD1327 128128 LCD Screen
After design approval would need a Circuit, PCB and Gerber files suitable for https://jlcpcb.com or https://www.pcbway.com
Please before you apply for the JOB make sure you understand the requirement and provide an example of your work you have done before.
Related categories:
Electronics
PCB Layout
Circuit Design
Internet of Things (IoT)
Circuit Board Layout