DMX 512 protocol decoder to PWM and analog 0-5 Volts - Schematic, BOM, Firmware developemnt and PCB Layout
Budget: $30 – $250 USD
DMX 512 decoder to PWM and 0 to 5 Volt DC output with 3 digit 7-segment LED display for DMX address indication. Push button UP and DOWN to select DMX Channel. RJ-45 Input and Output Connector with Analog Output 0-5V DC Connector. Input voltage to board 12-20VDC. PCB size to be determined but approximately 4x3 inches and component layout positions to be determined.
Board Overview
- Input DMX 512 protocol
- Read which channel to decode base on LED display Channel (0-512)
- Output corresponding level 0 - 100% duty-cycle and 0 - 5V based on 512 level (0-256)
Required and deliverables:
- Schematic design
- BOM
- PCB Layout with Gerbers
- Firmware Tested and qualified working
Board Overview
- Input DMX 512 protocol
- Read which channel to decode base on LED display Channel (0-512)
- Output corresponding level 0 - 100% duty-cycle and 0 - 5V based on 512 level (0-256)
Required and deliverables:
- Schematic design
- BOM
- PCB Layout with Gerbers
- Firmware Tested and qualified working